Maxtor ELX8-60 manual When using Disk Farm

APPENDIX ELX8 -60

When using Disk Farm

The following description is when ELX8-60 has internal primary disk and 3 sets of IEEE1394 HDD.

(1)When external HDD farm is connected to IEEE1394 port, “Disk Manager” runs automatically. If not, run it manually in “MenuàUtility àDisk Manager”.

(2)Select a second HDD of [F] Ext. Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].

<Note>

If connecting the device that is used in ELX8-60, type will be indicated as [V].

(3)Select a third HDD of [F] Ext . Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].

(4)Select a fourth HDD of [F] Ext . Press the “Apply ” button after selecting action as “Add”. Then [F] is changed to [*].

(5)Select a second HDD of [*] Ext . Press the “Apply ” button after selecting action as “Format ”. Then [*] is changed to [R].

(6)Select a third HDD of [*] Ext. Press the “Apply ” button after selecting action as “Format”. Then [*] is changed to [R].

(7)Select a fourth HDD of [*] Ext. Press the “Apply ” button after selecting action as “Format”. Then [*] is changed to [R].

(8)Press t he [EXIT] button to shut down “Disk Manager”.

Rugged CCTV 2003. 08. 13 (v 1.0) 55