Chapter 2 Command Codes

 

c. To specify the default forms length of 792 dot

 

rows (11 inches at 6 lpi), do not enter a value

 

in the form length parameter.

DISK

Optional parameter to store the form on the

 

printer’s flash memory. Enter DISK.

Example The following command creates a form named ORDER with the default forms length:

(cc)CREATE;ORDER

Delete Form

Purpose Deletes the form identified by the form name from the directory and the IGP memory.

Mode NORMAL

Format (cc)DELETE FORM; formname [;DISK]

(cc)The Special Function Control Code.

DELETE FORM

The Delete Form command; enter DELETE FORM.

formname

Identifies the form to be deleted. Enter the name of

 

the form exactly as it was created. You can delete

 

an entire form directory by inputting *ALL as the

 

form name.

DISK

Optional parameter to delete the form from the

 

flash memory where it was originally stored. Enter

 

DISK.

Comments For more information, refer to the Directory Example on page 247 and the Delete Example on page 248.

Example The following command deletes the form named “PAY#” from the directory, IGP memory, and the printer’s flash memory.

~DELETE FORM;PAY#;DISK

52

Page 52
Image 52
Printronix LQH-HWTM manual Delete Form, Disk, Optional parameter to delete the form from