Printronix LQH-HWTM manual Dir, Dark

Chapter 2 Command Codes

		location on the form. The SR and SC
		parameters specify the exact location of the
		alphanumeric field identified by n.
	c.	Replace L with a number equal to the number
		of characters in the dynamic alphanumeric
		string ranging from 1 through 512.
	d.	Dynamically enter the alphanumeric string
		itself in the Execute Form mode. The length of
		the alphanumeric string must be equal to or
		less than the value assigned to the length (L)
		parameter. Refer to “Execute Form: Dynamic
		Alphanumeric Data” on page 62.
	e.	If the dynamic data field is used, do not enter
		the ASCII TEXT parameter.
DIR	Optional parameter for rotating a character string.
	Use the following codes to indicate the direction of
	character rotation:
	a.	Enter CW for 90 degree clockwise rotation.
	b.	Enter CCW for 90 degree counterclockwise
		rotation.
	c.	Enter INV for inverted characters (180 degree
		rotation).
	The default orientation prints character strings in
	the standard horizontal format.
UC	Enter UC to specify uppercase-only characters.
	When uppercase-only is specified, all lowercase
	alpha character codes are converted automatically
	to uppercase. Consequently, do not specify
	uppercase-only characters if lowercase characters
	are required.
DARK	Optional parameter to produce bolder text. Enter
	DARK or D. (D is also allowed in the ALPHA
	command only.) More information about dark
	printing is provided on page 28.
SR	Defines the starting row of the alphanumeric data.
	Enter a value ranging from row 1 through one less
	than the length of the form. Character row or dot
	row is specified based on the Scale command
	(page 83), or use the CP.DP format (page 26).
SC	Defines the starting column of the alphanumeric
	data. Enter a value ranging from column 1 through
	one less than the width of the form. Character

column or dot column is specified based on the Scale command (page 83), or use the CP.DP format (page 26).

30