Printronix LQH-HWTM manual Specified, since it is fixed at 11 digits, plus any

Chapter 3 Bar Codes

	b.	Replace n with a number ranging from 1
		through 512 to identify the bar code field. The
		SR and SC parameters specify the exact
		location of the bar code field identified by n.
	c.	The length of the data field need not be
		specified, since it is fixed at 11 digits, plus any
		add-on data.
	d.	The information for the data field is entered
		dynamically during the Execute Form mode.
		(Refer to “Execute Form: Dynamic Bar Code
		Data” on page 63.) Do not use the data field
		parameter to enter data when the BFn
		parameters are used. However, refer to the
		data field description for available characters.
DARK	Optional parameter to produce darker bar codes.
	Enter DARK. Refer to “Dark Printing” on page 28
	for more information.
SR	Defines the starting row for the bar code. Enter a
	value ranging from row 1 to one less than the
	length of the form. Character row or dot row is
	specified based on the Scale command (page 83),
	or use the CP.DP format (page 26).
SC	Defines the starting column of the bar code. Enter a
	value ranging from column 1 to one less than the
	width of the form. Character column or dot column
	is specified based on the Scale command (page
	83), or use the CP.DP format (page 26).

(D)The printable character (delimiter) identifying the start and finish of the data field. Enter any printable character other than a slash (/), the SFCC, or a character used within the data. (It will not print with the data.) Use the same character at both ends of the data field.

data field Enter the characters for the bar code data, restricted to exactly 11 digits. If the 2- or 5-digit add-on data option is used, include this data at the end of the data field. The first digit is interpreted as the number system character. The remaining 10 digits are the data field characters. The characters available for the data field and number system are 0 through 9 (30 through 39 hex, respectively).

188