Printronix LQH-HWTM manual Is specified in the Font parameter. UPC-E data

UPC-E and UPC-E0

PDF	Optional parameter which affects printing of the
	human readable data field. The data field will print
	automatically unless the PDF-suppress command
	is specified in the FONT parameter. UPC-E data
	fields can be printed above or below the bar code
	symbol. If the PDF is not entered in the UPC-E
	command format, the data field automatically prints
	in OCR-B.
LOC	Optional parameter to identify the location of the
	printable data field. The default value is B, locating
	the human readable data below the bar code. A
	locates the printable data field above bar code. To
	compensate for printing the 0.1-inch high data, the
	height of the bar code body is reduced 0.1-inch.
FONT	Optional parameter to select the font for the human
	readable data field. The default font type for UPC-A
	bar codes is OCR-B; if no PDF command is
	entered in the command format, the data field is
	printed automatically in OCR-B. Entering X will also
	designate the OCR-B type font. Enter N to select
	the normal ASCII 10 cpi font; enter O to select the
	OCR-A 10 cpi font. Enter P to select 12 cpi. Enter Q
	to select 13 cpi. Enter R to selct 15 cpi. Enter T to
	select 17 cpi. Enter V to select 20 cpi. Enter S to
	suppress printing the data field and the trailing
	lower portions of the UPC bar code.
STOP	Ends the Bar Code command while the IGP
	continues in the Create Form mode. Enter STOP. If
	STOP is not entered, an error message results.

195