Setup

Setup

Purpose Automatically executes and loads IGP/PGL commands such as forms, logos, customized print environments, etc., from flash memory to the printer whenever printer power is applied or when the RESET command (page 82) is sent.

Mode NORMAL

Format (cc)SETUP

HOST DATA (cc)SETUPEND

(cc)The Special Function Control Code.

SETUP

The Setup command; enter SETUP.

HOST DATA Any IGP/PGL commands, form definitions, text, etc. to be stored and executed at power-up.

SETUPEND Finishes storing host data and returns the printer to the NORMAL mode. Enter SETUPEND.

Comments Because the RESET command causes the setup routine to be executed, the RESET command can not be in the SETUP information or else an infinite loop will occur.

If IGP/PGL commands have not been added between the SETUP and SETUPEND commands, the SETUP.PTX file on the flash memory is automatically deleted, and no IGP/PGL SETUP commands are executed upon printer power-up.

Note The SETUP.PTX is automatically created by the IGP/PGL when the ~SETUPEND command is received. When the SETUP.PTX file is not on the flash memory, no extra IGP/PGL commands are performed on power up.

85

Page 85
Image 85
Printronix LQH-HWTM manual Setup, Host Data ccSETUPEND