Printronix LQH-HWTM manual 127

EAN 13

		always encoded in format C. Table 15 defines the
		left side data field format based on the number
		system character.
PDF		Optional parameter which affects printing of the
		human readable data field. The data field will print
		automatically in the default OCR-B font unless the
		PDF-suppress command is specified in the FONT
		parameter. The human readable data field can be
		printed above or below the bar code symbol.
LOC		Optional parameter to identify the location of the
		printable data field. The default value is B, locating
		the human readable data below the bar code. A
		locates the printable data field above the bar code.
		To compensate for printing the 0.1-inch high data,
		the height of the bar code body is reduced 0.1 inch.
FONT		Optional parameter to select the font for the human
		readable data field. Enter O to select OCR-A font;
		enter X to select OCR-B font; enter N to select 10
		cpi; enter P to select 12 cpi; enter Q to select 13
		cpi; enter R to select 15 cpi; enter T to select 17 cpi;
		enter V to select 20 cpi. Enter S to suppress
		printing the data field and the trailing lower portions
		of the EAN bar code.
STOP		Ends the Bar Code command while the IGP
		continues in the Create Form mode. Enter STOP. If
		STOP is not entered, an error message results.
	Table 15. Left Side Data Field Format
			Format for Left Side Data Field Positions
Number System
		12		11	10	9	8	7
Character Value
0		A		A	A	A	A	A
1		A		A	B	A	B	B
2		A		A	B	B	A	B
3		A		A	B	B	B	A
4		A		B	A	A	B	B
5		A		B	B	A	A	B
6		A		B	B	B	A	A
7		A		B	A	B	A	B
8		A		B	A	B	B	A
9		A		B	B	A	B	A

127