Printronix LQH-HWTM manual Replace L with the maximum number

Chapter 3 Bar Codes

	b.	Replace n with a number ranging from 1
		through 512 to identify the bar code field. The
		SR and SC parameters specify the exact
		location of the bar code field identified by n.
	c.	Replace L with the maximum number of
		characters in the field. The actual data
		provided dynamically during the Execute Form
		mode can be less than L. It is permitted to
		supply no data at all.
	d.	The information for the data field is entered
		dynamically during the Execute Form mode.
		(Refer to “Execute Form: Dynamic Bar Code
		Data” on page 63.) Do not use the data field
		parameter to enter data when the BFn;L
		parameters are used. However, refer to the
		data field description for available characters
		to use during Execute Form mode.
DARK	Optional parameter to produce darker bar codes.
	Enter DARK. Refer to “Dark Printing” on page 28
	for more information.
SR	Defines the starting row for the bar code. Enter a
	value ranging from row 1 to one less than the
	length of the form. Character row or dot row is
	specified based on the Scale command, or use the
	CP.DP format.
SC	Defines the starting column of the bar code. Enter a
	value ranging from column 1 to one less than the
	width of the form. Character column or dot column
	is specified based on the Scale command, or use
	the CP.DP format.

(D)The printable character (delimiter) identifying the start and finish of the data field. Enter any printable character other than a slash (/), the SFCC, or a character used within the data. The same character must be used on both ends of the data field. It will not print with the data.

data field The bar code data. The data field for UCC/EAN- 128 consists of an “application identifier” (AI) of two to four numbers, followed by data of appropriate length (variable or fixed) and type (numeric or alphanumeric). See Table 17 for a list of application identifiers and their associated data fields.

The FNC1 character is required as the first character after the start code for UCC/EAN-128 bar codes, and IGP will always generate it automatically. It will appear in the bar code but not in the human readable field. Do not supply FNC1 in the data field.

180