Printronix LQH-HWTM manual Corner Example

Chapter 2 Command Codes

STOP	Stop indicates the end of the CORNER command;
	enter STOP, and the IGP will wait for a new
	command. If not entered, the IGP will wait for
	another set of Corner command parameters.

Example The following program specifies a corner set as shown in Figure

6.To illustrate positioning, the starting row and column are indicated on the example but do not necessarily reflect actual location on the page. (Note the position of the ending row and ending column; they do not include the line thickness.)

CORNER
5;27;27;42;55;4;6	(Each corner in the set is 5
STOP	dot rows thick, 4 character
	rows high, 6 character columns
	wide)
COLUMN 27		HORIZONTAL LENGTH
		6 COLUMNS
ROW 27		VERTICAL
		LENGTH
		4 ROWS

ROW 42

COLUMN 55

Figure 6. Corner Example

50