Delete Logo

Delete Logo

Purpose Deletes the logo identified by the logo name from the directory and the IGP memory.

Mode NORMAL

Format (cc)DELETE LOGO; logoname [;DISK]

(cc)The Special Function Control Code.

DELETE LOGO

The Delete Form command; enter DELETE LOGO.

logoname

Identifies the logo to be deleted. Enter the name of

 

the logo exactly as it was created. You can delete

 

an entire logo directory by inputting *ALL as the

 

logo name.

DISK

Optional parameter to delete the logo from the flash

 

memory where it was originally stored. Enter DISK.

Comments Printing a form that contains a deleted logo will produce an error message. For more information, refer to the Directory Example and the Delete Example on pages 205 and 207.

Example The following command deletes the logo named “MEMO” from the directory, IGP memory and the printer’s flash memory.

~DELETE LOGO;MEMO;DISK

Directory

Purpose Prints the following information: (1) all defined forms and logos,

(2)logo assignment to forms, and (3) memory usage and availability.

Mode NORMAL

Format (cc)DIRECTORY [;DISK]

(cc)The Special Function Control Code. DIRECTORY The Directory command; enter DIRECTORY.

DISK

Optional parameter to specify the forms and logos

 

stored on the flash memory. Enter DISK.

Comments As many forms and logos as printer memory allows may be stored in IGP memory. If the memory is full, the form will not print; available space in the memory must be at least the size of the form being executed.

For more information, refer to the Directory Example on page 247.

53

Page 53
Image 53
Printronix LQH-HWTM manual Delete Logo, Directory, Optional parameter to delete the logo from the flash