Printronix LQH-HWTM manual Directory Command, Example, Direct.Fom, ~Directory, Print DIRECT.FOM

Example

Directory Command

The Directory command lists the contents of the IGP directory in IGP memory. The directory command provides the following information:

•All form names and logo names currently defined

•The association of logos to forms

•The amount of memory used for form storage

•The amount of dynamic storage space used and available

Example

A form will not execute unless enough room exists in the memory as indicated in the work space bytes free portion of the directory listing. To print the directory, open a file, input the directory command, exit the file, and print. For example:

Enter	Format
DIRECT.FOM	(System Format)
~DIRECTORY	(cc)DIRECTORY
.PRINT DIRECT.FOM	(System Format)

The Directory command can only be used when the IGP is in the Normal mode. Upon completion of the directory listing, the IGP returns to the Normal mode. If the IGP is not in the Normal mode, input the Normal mode command before the Directory command.

247