ELX8 | INSTALLATION AND CONNECTION |
8.2.4. Time Format
(1)Select “Time Format” using the [ / ] or the [/] buttons and press [ENTER].
(2)Two Time Formats are available; ‘MM/DD/YYYY’ and ‘YYYY/MM/DD’. Select a value using [/] buttons , and press the [EXIT] button when finished. (Default value is ‘MM/DD/YYYY’.)
8.2.5. Date
(1)Select “Date” using the [ / ] or the [/] buttons and press [ENTER].
(2)Select ‘M M ’/‘DD’/‘YYYY’ using the [ / ] buttons, and select t he value using the [/] buttons .
(3)P ress the [EXIT] button when finished.
8.2.6. Time
(1)Select “Time” using the [ / ] or the [/] buttons and press [ENTER].
(2)Select ‘HH’/‘M M ’ using the [ / ] buttons, and select t he value using the [/] buttons.
(3)P ress the [EXIT] button when finished.
8.2.7. Apply Date/Time
Most setting values are applied automatically, when exiting from the related menu page. But “Date”
&“Time” settings are not applied automatically because they may critically affect the file system of the recorded HDD. To apply Date/Time setting s confirm settings with [Apply Date/Time] button.
(1)Select “Apply Date/time” using the [ / ] or the [/] buttons and press [ENTER]. A warning message will appear.
(2)Select “OK” using the [ / ] or the [/] buttons and press [ENTER]. To cancel, press the [EXIT] button.
8.3. Setting Recording Condition
Recording conditions under the “Quick Setup ” menu tab apply the same values to all analog channels 1~8. All settings are applied for 24 hours /day regardless of the values set for “Time Schedule” or “Alarm Rec. ”
24 | 2003. 08. 13 (v 1.0) | Rugged CCTV |