ELX8 | INSTALLATION AND CONNECTION |
<Note> Wire Handling
Trimming Wire
When connect ing a wire to a terminal block, follow the instructions below. Note the different types of
wire that can be used.
Stranded Wire: Peel off the wiring cover
8~10mm and solder it. Wire gage should be
AWG 22 ~ 26.
Solid Wire: Peel off the wiring cover 8~10mm
and solder it. Wire gage should be AWG 20 ~
26.
Inserting & removing wire
To insert the wire, use a screwdriver as
shown in the diagr am to the right.
13. Connecting USB Device
USB port can be used to copy up to 1 minute of images to aUSB Flash memory disk. When connecting
USB device, do not exceed the rated values of USB device.
USB Spec. | Ver 1.1 (Max 12M bps) |
Available Device | USB M emory Stick, |
Output Voltage/Current | Max. 200mA per DC 5V / Port |
<Note>
The disk should be formatted with FAT32 type.
34 | 2003. 08. 13 (v 1.0) | Rugged CCTV |