Philips DVDR75 owner manual DV S-VIDEO Video Audio Left Right

Page 17

Hookups (cont’d) 17

Connecting to Other Equipment

Dubbing Videotape to a DVD+R/DVD+RW

OPEN/CLOSE

STANDBY-ON

S-VIDEO

VIDEO

L AUDIO R

CAM 1

You can connect a Video Cassette Recorder (VCR), Camcorder, or DVD Player to the Recorder’s CAM or EXT IN jacks.

A sample connection with a Camcorder is shown here, using the CAM 1 AUDIO/VIDEO IN jacks on the front of the Recorder. These jacks are the most easily accessible. Other equipment will connect similarly, but this is a common connection possibility.

You will need this connection to copy videotapes onto a DVD+R or DVD+RW. There are Component Video, S-Video, Digital Video, and Audio jacks on the front and rear of the Recorder. If your other equipment has these jacks, use them instead. Use the IN jacks on the rear of the Recorder for permanent connections.That will hide the cables from view.

1 Connect the DVD Recorder directly to your TV. Choose a connection from pages 10-16.

2 To access the AUDIO/VIDEO IN jacks on the front of the Recorder, flip down the door that covers the jacks.

3 Connect a video cable to the VIDEO OUT jack of your Camcorder and to the yellow CAM 1 VIDEO IN jack on the front of the DVD Recorder. Use an RCA-style video cable, which is usually marked with yellow. (One video cable is supplied with the Recorder.)

4 Connect audio cables to the AUDIO OUT jacks of your Camcorder and to the red and white CAM 1 AUDIO IN jacks on the front of the DVD Recorder. Most audio cables are color coded. Match the cable colors to the jack colors. (Two sets of audio cables are supplied with the DVD Recorder.)

5 When all connections are complete, connect all the equipment to power. Turn on all the equipment. Press STANDBY-ON y on the front of the DVD Recorder to turn it on.

6 Set your TV to the correct Video In channel. This will be channel 3 or 4 or a specific Video In channel, depending on your connection between the Recorder and the TV. Refer to the connection details on pages 9-16. Or, simply go to channel 5 on your TV, then change channels down until you see the DVD Recorder’s logo on the TV screen. The Initial Setup screen will appear the first time you turn on the Recorder. Go to page 18 to continue.

7 To watch or record the material playing on the other equipment, press MONITOR to put the Recorder in Monitor mode. Press CH+8 or CH-9 to select CAM1 at the Recorder. This is located after your highest TV channel and before your lowest TV channel. Choose CAM1 if you used the connection shown on this page (with the jacks on the front of the Recorder). If you use the IN EXT 1 or IN EXT 2 jacks on the rear of the Recorder instead, choose channel EXT 1 or EXT 2. Choose the chan- nel that matches the jacks to which you connected the other equipment.

Start playing the material by pressing PLAY on the other equip- ment. Press Record I on the front of the DVD Recorder to start recording. See page 21.

DV S-VIDEO VIDEO AUDIO

LEFT RIGHT

Helpful Hints

•Use the DV (Digital Video) IN jack to connect the Recorder to a Personal Computer that has a Digital Video output.The PC must have an IEEE 1394 Firewire connector. Limited PC applications may be supported. You also can use this jack to connect the Recorder to Digital Video or Hi-8 camcorders. If you use the DV IN jack, choose CAM 2 at the Recorder in Monitor mode to see the mate- rial playing on other equipment.

•Most prerecorded videotapes and DVDs are copy protected. If you try to copy them, the Recorder display may show “COPY PROTECT.”

•If the Recorder’s display shows “NO SIGNAL,” adjust the track- ing or play the tape on the VCR/Camcorder. See your VCR/Camcorder manual.

•Do not connect a Progressive Scan video source (such as a DVD Player) to the IN EXT 1 COMPONENT VIDEO jacks.The Recorder cannot receive Progressive Scan video.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DVDR75 Remember, to get the most from your Philips prod Dear Philips product ownerCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Example of Antenna Grounding per National Electrical Code Safety Information cont’dCause the product and cart combination to over- turn Introduction Discs for Recording and Playing Playable DiscsDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Determining the best possible connection HookupsBefore you begin RememberHookups cont’d Connecting to a TV Only TV has only an Antenna In jackConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Turn on the TV power. Set the TV to the correct Audio/Video Connecting to a TV Only TV has a yellow Cvbs Video In jackSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Instructions continue on the next Initial SetupPress STANDBYy to turn on the Recorder To choose the language you prefer, then press OKChoose the preferred TV Shape, then press OK Initial Setup cont’dFrom previous To stop play at any time, press Stop C Quick Disc PlaybackQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel TV Channel Programming Press System MENU. The Installation menu will reappearVCR Plus+ Channels Menu screen, then press to enter the Installation menuYour time zone While storing the settingPress CH-9to choose Daylight Saving. Press or to 11Press System Menu repeatedly to remove all menus Time/Date ManualMenu Bar Menu BarsOn-screen Symbols On-screen Symbols, Status BoxStatus Box Disc status iconsIndex Picture Screen Title Settings MenuTitles Disc BarCurrent time no timer recordings are scheduled Timer Information boxInformation Boxes Tuner Information boxTitle/Disc menus Title/Disc Menus, Chapter/Track SelectionChapter/Track Selection Press Disc Menu during Disc playSubtitles Audio LanguageZoom Zoom, Camera AngleCamera Angle During play, press System Menu so Menu Bar 1 appearsPress System Menu during play so Menu Bar 1 appears Still Picture/Frame-by-frame PlaybackSound Forward and Reverse Searching Slow Motion, SearchingSlow Motion Scan Time Search, ScanTime Search Repeat A-B Repeat, Repeat A-BRepeat One-Touch Recording When the Start time is correct, press Timer RecordingCH+8 to select VCR Plus+ system, then press Press Timer on the remote controlPress the Number buttons to enter the PlusCode number From your TV guide, then press OK. If you make a mistakePress OK to erase the timer recording. Timer Cleared will Erasing Timer RecordingsTimer button.The Timer List will reappear Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Play full title Title Settings MenuErase this title Press to return to the Index Picture Screen if necessaryChapter Markers Append recordingRecord Settings Editing Disc Information Screen To select the next Chapter EditingThis option is not always available Press FSS to remove the Favorite Scene Selection menuFinalize Disc Press System Menu to remove the menus Playback ControlChange Code Access ControlTwice.This will set your code for the first time Press CH-9repeatedly to select Change code, then pressPress again, then press the Number buttons to enter Child LockYour four-digit code. See Child lock will be highlighted. PressLocking or Unlocking Specific Discs Access Control cont’dScreen. Child Lock should be Locked. See 1Insert a DiscWill stop. Enter the four-digit code to play the Disc Parental LevelYour four-digit code. Child lock will be highlighted Access Control contdChange Country DVD Recorder Features Menu Recorded in the regular format Picture SettingsDigital output will be selected. Press Digital OutputAnalog Output SAP Language SettingsRemote Control Used Night Mode, Remote Control UsedNight Mode Glossary Helpful Hints Helpful Hints contd Diagnostic Test Disc Formats Supported SpecificationsDVD Recorder Limited WarrantyInformation Index IB8451E001 3139 246 1336
Top Page Image Contents