Philips DVDR75 Access Control cont’d, Locking or Unlocking Specific Discs, 1Insert a Disc

56 Access Control (cont’d)

Locking or Unlocking Specific Discs

Not all Discs are rated or coded by Parental levels.You may choose to specifically lock or unlock a Disc by choosing Play once or Play always.This way, you can disable viewing regardless of the rating of a DVD. You will need to know your 4-digit code in order to view the Disc.

	Insert a Disc. The Access Control message will appear on the TV
1 screen. (Child Lock should be Locked. See page 55.)
		locked	Access Control
		p Play once	[ ] [ ] [ ] [ ]
		Play always	[ ] [ ] [ ] [ ]
		Choose 'Play always' to insert the disc in
		the child-safe list

2 Press CH+8 or CH-9to select Play once or Play always.

Then, press the Number buttons to enter your four-digit code.

If you select Play Once, the Disc will play one time. If you stop play- back, open the Disc tray, or turn off the Recorder’s power, the Access Control screen will reappear when you try to play the Disc again.

If you select Play Always, the Disc will play even if you turn off the DVD Recorder, open the disc tray, or set Child Lock to Ç (Locked). See page 55.

3 If you later decide to lock the Disc so it will not play always: When you insert the Disc, safe { appears on the TV screen. Press STOP C while safe { is on the TV screen. Locked will appear. If the Disc continues playing, press STOP C again to stop playback.You may need to turn off the DVD Recorder or remove the Disc before the Disc is completely Locked.The next time you turn on the DVD Recorder or try to play the Disc, the Access Control screen will appear.The Disc will not play unless you enter the four-digit code.

	STANDBY
MONITOR
TV / DVD	T / C PLAY MODE REC. MODE

1	2	3
4	5	6
7	8	9	2
DISC	0	SYSTEM
	MENU
SELECT		OK
	CH
	CH
TIMER
FSS		TV VOLUME
	RETURN CLEAR
	PLAY
	STOP		3
I		I
AUDIO		PAUSE
	REC/OTR

1Insert a Disc.

Helpful Hints

•The Access Control screen will appear when you try to play a Locked Disc. If you do not know your code, press STOP çC.Then, select Access Control as described in steps 1-3 on page 54. When you are asked to enter the code, press STOP C four times. Press SYSTEM MENU, then press PLAY : to start playback.This restores all the Access Control settings to their original factory settings.

•Two-sided DVDs may have a dif- ferent ID for each side.To unlock the entire Disc, unlock each side.

•Multi-volume Disc sets may have a different ID for each volume.

Unlock each volume.