Philips DVDR75 owner manual One-Touch Recording

Page 41

One-Touch Recording 41

1 Insert a recordable DVD+RW or DVD+R into the Recorder.

2 In the Index Picture Screen of a DVD+RW, press CH+8 or CH-9to select an Empty Title (or empty Index Picture box) on the Disc that has enough time for the recording. Or, select the place at which you want to start the new recording in order to overwrite other recordings. See page 48.

You may skip this step if you use Safe Record. See step 5.

Or, if you are using a DVD+R, you may skip this step. Recordings on a DVD+R are made at the end of the Disc automatically. Previous recordings are not overwritten.

3 Press MONITOR to see TV channels through the DVD Recorder. Make sure you have programmed channels. See page 26.

4 Press CH+8, CH-9, or the Number buttons to select the channel you wish to record.

If you are using a Cable Box/Satellite Receiver, enter channel 3 or 4 (the output channel of your Cable Box/Satellite Receiver) or the EXT channel (that corresponds to the jacks to which you connected the Cable Box/Satellite Receiver). Set the channel you want to record at the Cable Box/Satellite Receiver. Leave it on for the recording.

5 Press REC/OTR I twice to start a 30-minute recording. Press REC/OTR I repeatedly to record longer timed recordings. The length of recording available depends on the cur- rent recording mode/speed and the amount of time available on the Disc. Recording mode/speed details are on page 49. Recording will begin about 30 seconds after you press REC/OTR I. (The Disc takes this time to prepare for recording.)

Or, use Safe Record to have the DVD Recorder automatically find the empty space at the end of a DVD+RW; this prevents overwriting other recordings.To do so, press and hold REC/OTR I for about two seconds, or until SAFE REC appears on the Recorder’s display panel.Then, press REC/OTR I repeatedly to choose the time length you want for your recording.

If you press REC/OTR I only once, or press and hold REC/OTR I one time and immediately start Safe Record, the Recorder will record the current channel or source until the end of the Disc is reached.The Recorder will turn off automatically.

6 Press STOP C if you need to stop the recording before the designated end time. Otherwise, the Recorder will automatically stop recording at the designated end time and turn itself off.

●If you plan to play a DVD+R on another DVD Player, finalize the Disc. Follow the steps on page 52.

●To edit your recordings, see page 51. However, editing changes may not be accessible when you play the Disc on other DVD Players.

●To erase a recording, see “Erase this title” details on page 47.

3

 

 

STANDBY

 

MONITOR

 

 

 

TV / DVD

T / C PLAY MODE REC. MODE

 

 

1

2

3

4

 

4

5

6

 

7

8

9

 

DISC

0

SYSTEM

 

 

 

MENU

 

2,4

 

SELECT

 

OK

 

 

 

 

 

CH

 

 

 

 

CH

 

 

 

TIMER

 

 

 

 

FSS

 

TV VOLUME

 

 

 

RETURN CLEAR

 

 

 

 

PLAY

 

 

6

 

STOP

 

 

I

 

I

 

AUDIO

REC/OTR

PAUSE

5

 

 

 

 

Helpful Hints

•“Disc locked” will appear on the TV if a protected DVD+RW or DVD+R is in the Recorder. Recording is not possible.

•If the power fails during recording, the Index Picture Screen may not match the actual video content on the Disc.The last recorded Title may be lost.A power failure or unit failure/system crash also may destroy all the material recorded on a Disc.

•If no free space remains on the Disc, DISC FULL will appear. Recording is not possible.

•Press SYSTEM MENU during recording to access or remove the Status box,Tuner Information box, and/or Timer Information box. See pages 31 and 33.

•The recommended operating tem- perature range for the Recorder is from 32°F-122°F (Fahrenheit) for DVD+RW recording and 32°F- 104°F for DVD+R recording. Exceeding these ranges may

cause unstable recording results.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents DVDR75 Remember, to get the most from your Philips prod Dear Philips product ownerCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Example of Antenna Grounding per National Electrical Code Safety Information cont’dCause the product and cart combination to over- turn Introduction Discs for Recording and Playing Playable DiscsDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Determining the best possible connection HookupsBefore you begin RememberHookups cont’d Connecting to a TV Only TV has only an Antenna In jackConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Turn on the TV power. Set the TV to the correct Audio/Video Connecting to a TV Only TV has a yellow Cvbs Video In jackSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Instructions continue on the next Initial SetupPress STANDBYy to turn on the Recorder To choose the language you prefer, then press OKChoose the preferred TV Shape, then press OK Initial Setup cont’dFrom previous To stop play at any time, press Stop C Quick Disc PlaybackQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel TV Channel Programming Press System MENU. The Installation menu will reappearVCR Plus+ Channels Menu screen, then press to enter the Installation menuYour time zone While storing the settingPress CH-9to choose Daylight Saving. Press or to 11Press System Menu repeatedly to remove all menus Time/Date ManualMenu Bar Menu BarsOn-screen Symbols On-screen Symbols, Status BoxStatus Box Disc status iconsIndex Picture Screen Title Settings MenuTitles Disc BarCurrent time no timer recordings are scheduled Timer Information boxInformation Boxes Tuner Information boxTitle/Disc menus Title/Disc Menus, Chapter/Track SelectionChapter/Track Selection Press Disc Menu during Disc playSubtitles Audio LanguageZoom Zoom, Camera AngleCamera Angle During play, press System Menu so Menu Bar 1 appearsPress System Menu during play so Menu Bar 1 appears Still Picture/Frame-by-frame PlaybackSound Forward and Reverse Searching Slow Motion, SearchingSlow Motion Scan Time Search, ScanTime Search Repeat A-B Repeat, Repeat A-BRepeat One-Touch Recording When the Start time is correct, press Timer RecordingCH+8 to select VCR Plus+ system, then press Press Timer on the remote controlPress the Number buttons to enter the PlusCode number From your TV guide, then press OK. If you make a mistakePress OK to erase the timer recording. Timer Cleared will Erasing Timer RecordingsTimer button.The Timer List will reappear Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Play full title Title Settings MenuErase this title Press to return to the Index Picture Screen if necessaryChapter Markers Append recordingRecord Settings Editing Disc Information Screen To select the next Chapter EditingThis option is not always available Press FSS to remove the Favorite Scene Selection menuFinalize Disc Press System Menu to remove the menus Playback ControlChange Code Access ControlTwice.This will set your code for the first time Press CH-9repeatedly to select Change code, then pressPress again, then press the Number buttons to enter Child LockYour four-digit code. See Child lock will be highlighted. PressLocking or Unlocking Specific Discs Access Control cont’dScreen. Child Lock should be Locked. See 1Insert a DiscWill stop. Enter the four-digit code to play the Disc Parental LevelYour four-digit code. Child lock will be highlighted Access Control contdChange Country DVD Recorder Features Menu Recorded in the regular format Picture SettingsDigital output will be selected. Press Digital OutputAnalog Output SAP Language SettingsRemote Control Used Night Mode, Remote Control UsedNight Mode Glossary Helpful Hints Helpful Hints contd Diagnostic Test Disc Formats Supported SpecificationsDVD Recorder Limited WarrantyInformation Index IB8451E001 3139 246 1336
Top Page Image Contents