Philips DVDR75 Press CH-9to choose Daylight Saving. Press or to, While storing the setting

Page 28
Time/date Automatic
K
u PBS Channel
L Daylight Saving
Time Zone
pause while storing the setting.
If you do not know your PBS channel number, choose Auto.The Recorder will choose a PBS station for you and set the time.
If you want to set the clock manually, choose Off.The Recorder will not update the time automatically according to a PBS station.
Press SYSTEM MENU. Press ; to select in the top left corner of the menu bar at the top of the TV screen.
1
2 Press CH-9repeatedly to select at the end of the next menu, then press : to enter the Installation menu.
3 Press CH-9repeatedly to select Time/Date, then press :.
4 Automatic will be selected. Press :.
5 With PBS Channel selected, press ; or : to choose the chan- nel number of your PBS station, then press OK. The menu will
28 Clock Setting
Time/Date Automatic
The Recorder can set the time and date automatically by referring to a PBS station. If the Recorder chooses an incorrect PBS channel or sets the time/date incorrectly, set the clock manually. See page 29.
Before you begin, make sure TV channels are set. See page 26.

s 010 B

Off

Auto.

To store

Press OK

Press CH-9to choose Daylight Saving. Press ; or : to

choose On, Off, or Auto, then press OK. The menu will pause

6 while storing the setting. Choose Auto if you want the clock set

according to the PBS station’s Daylight Savings Time schedule.

 

Time/date

 

 

 

Automatic

 

 

 

K PBS Channel

010

 

 

u Daylight Saving

s Off B

 

 

L Time Zone

Auto.

To store

Press OK

Press CH-9to choose Time Zone. Press ; or : repeatedly to

choose your time zone, then press OK. The menu will pause

7 while storing the setting.

If you want the Recorder to use the time zone from which your PBS

station broadcasts, choose Auto. If your PBS station broadcasts from a

different time zone than the one in which you live, be sure to select

your time zone.

 

Time/date

 

 

 

Automatic

 

 

 

 

PBS Channel

010

 

 

K

Daylight Saving

Off

 

u

Time Zone

s Auto. B

 

 

L

 

 

 

To store

Press OK

8 Press SYSTEM MENU repeatedly to remove the menus. Press STANDBY y to turn off the Recorder. In a few minutes, the time will appear on the display panel on the front of the Recorder.

If the Recorder cannot find the time, you may see an error message when you turn on the Recorder. Check the PBS channel and try again. Or, set the clock manually. See page 29.

STANDBY

MONITOR

 

8

TV / DVD

T / C PLAY MODE REC. MODE

1 2 3

4 5 6

7

8

9

1,8

 

MENU

 

DISC

0

SYSTEM

 

 

 

SELECT

 

OK

1-7

 

CH

 

 

CH

 

 

TIMER

 

 

 

FSS

 

TV VOLUME

 

 

RETURN CLEAR

 

 

 

PLAY

 

 

 

STOP

 

 

I

 

I

 

AUDIOPAUSE

REC/OTR

Helpful Hints

•The Recorder may set the clock when you complete Initial Setup. If the correct time appears on the display, you do not need to set the clock.

•The factory default setting of Daylight Saving is On.

•The Recorder can use the PBS channel to set the clock only if the PBS channel is a memo- rized channel.To set up chan-

nels, see page 26.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents DVDR75 Dear Philips product owner Remember, to get the most from your Philips prodCard within 10 days. So please mail It to us right now For Customer UseContents Safety Information Cause the product and cart combination to over- turn Safety Information cont’dExample of Antenna Grounding per National Electrical Code Introduction Playable Discs Discs for Recording and PlayingDiscs Unsuitable for Recording or Playing Discs for Playing OnlyGeneral Information Hookups Determining the best possible connectionBefore you begin RememberConnecting to a TV Only TV has only an Antenna In jack Hookups cont’dConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Turn on the TV power. Set the TV to the correct Audio/VideoSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Initial Setup Instructions continue on the nextPress STANDBYy to turn on the Recorder To choose the language you prefer, then press OKFrom previous Initial Setup cont’dChoose the preferred TV Shape, then press OK Quick Disc Playback To stop play at any time, press Stop CQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel Press System MENU. The Installation menu will reappear TV Channel ProgrammingMenu screen, then press to enter the Installation menu VCR Plus+ ChannelsPress CH-9to choose Daylight Saving. Press or to While storing the settingYour time zone Time/Date Manual 11Press System Menu repeatedly to remove all menusMenu Bars Menu BarOn-screen Symbols, Status Box On-screen SymbolsStatus Box Disc status iconsTitle Settings Menu Index Picture ScreenTitles Disc BarTimer Information box Current time no timer recordings are scheduledInformation Boxes Tuner Information boxTitle/Disc Menus, Chapter/Track Selection Title/Disc menusChapter/Track Selection Press Disc Menu during Disc playAudio Language SubtitlesZoom, Camera Angle ZoomCamera Angle During play, press System Menu so Menu Bar 1 appearsSound Still Picture/Frame-by-frame PlaybackPress System Menu during play so Menu Bar 1 appears Slow Motion Slow Motion, SearchingForward and Reverse Searching Time Search Time Search, ScanScan Repeat Repeat, Repeat A-BRepeat A-B One-Touch Recording Timer Recording When the Start time is correct, pressPress Timer on the remote control CH+8 to select VCR Plus+ system, then pressPress the Number buttons to enter the PlusCode number From your TV guide, then press OK. If you make a mistakeErasing Timer Recordings Press OK to erase the timer recording. Timer Cleared willTimer button.The Timer List will reappear Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Title Settings Menu Play full titleErase this title Press to return to the Index Picture Screen if necessaryAppend recording Chapter MarkersRecord Settings Editing Disc Information Screen Editing To select the next ChapterThis option is not always available Press FSS to remove the Favorite Scene Selection menuFinalize Disc Playback Control Press System Menu to remove the menusAccess Control Change CodeTwice.This will set your code for the first time Press CH-9repeatedly to select Change code, then pressChild Lock Press again, then press the Number buttons to enterYour four-digit code. See Child lock will be highlighted. PressAccess Control cont’d Locking or Unlocking Specific DiscsScreen. Child Lock should be Locked. See 1Insert a DiscParental Level Will stop. Enter the four-digit code to play the DiscChange Country Access Control contdYour four-digit code. Child lock will be highlighted DVD Recorder Features Menu Picture Settings Recorded in the regular formatDigital Output Digital output will be selected. PressAnalog Output Language Settings SAPNight Mode Night Mode, Remote Control UsedRemote Control Used Glossary Helpful Hints Helpful Hints contd Diagnostic Test Specifications Disc Formats SupportedLimited Warranty DVD RecorderInformation Index IB8451E001 3139 246 1336
Top Page Image Contents