Philips DVDR75 TV Channel Programming, Press System MENU. The Installation menu will reappear

Page 26

26 TV Channel Programming

Although the DVD Recorder selects available TV channels during Initial Setup, you may want to repeat the process later if more channels become available in your area.This will erase and replace all previously stored chan- nels.To update the available channels, follow these steps.

Press SYSTEM MENU. Press ; to select

in the top left

1 corner of the menu bar at the top of the TV screen.

Press CH-9repeatedly to select in the next menu, then

2 press : to enter the Installation menu.

 

 

Installation

 

 

 

 

K

 

 

 

 

 

 

 

 

 

u B Auto Ch. Programming

B

 

 

LAdd/Delete Channels VCR Plus+ Ch. Time/Date Cable/Antenna

To exit press

SYSTEM MENU

3 Auto Ch. Programming will be selected. Press OK. “Searching for TV channels” will appear, along with a scale showing channels that are being memorized.The number of channels found will show on the screen as the searching progresses.This will take a few minutes, depending on the number of channels available.

4 When the channel search finishes, “Auto ch. search com- plete” will appear, along with the total number of channels found.

Press SYSTEM MENU. The Installation menu will reappear.

If you are satisfied with the channels found, press SYSTEM MENU repeatedly to remove the menu. You are finished.

To add or delete additional channels, press CH-9to select

Add/Delete Channels, then go to step 5.

Installation

KAuto Ch. Programming

u B Add/Delete Channels

B

 

 

L VCR Plus+ Ch.

 

Time/Date

 

Cable/Antenna

 

To exit press

SYSTEM MENU

5 Press :. A channel list will appear. Beside each channel number, you will see “Delete” or “Add.”

6 Press CH+8 or CH-9to select the channel you want to add or delete, then press ; or : to choose Add or Delete for that channel. Press OK to store your choice. “Stored” will appear briefly in the lower left corner of the menu.

Repeat step 6 as often as necessary to add or delete all the channels you want.

7 Press SYSTEM MENU repeatedly to remove all the menus when you are finished.

STANDBY

MONITOR

TV / DVD

T / C PLAY MODE REC. MODE

1 2 3

4 5 6

7

8

9

1,4,7

 

MENU

 

DISC

0

SYSTEM

 

 

 

SELECT

 

OK

1-6

 

CH

 

 

CH

 

 

TIMER

 

 

 

FSS

 

TV VOLUME

 

RETURN CLEAR

PLAY

Helpful Hints

•Access added channels by pressing CH+8 or CH-9. Deleted channels will be skipped. Delete channels you rarely watch.You still can select deleted channels with the Number buttons.

•If new channels become avail- able, or if you receive a chan- nel the Recorder did not set, add the channel.

•The Recorder detects whether you connected an Antenna or Cable TV signal. If you are not receiving the correct channels,

reset your channels. Follow steps 1-2 above. Press CH-9 to choose Cable/Antenna, then press OK. Press B or s to choose Cable, Anten. (antenna), or Auto (for the Recorder to detect automatically). Press OK. “Stored” will appear briefly in the lower left corner of the menu. Press SYSTEM MENU. Press OK again to reset the channels. When the search ends, press SYSTEM MENU repeatedly to clear the screen.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents DVDR75 Card within 10 days. So please mail It to us right now Dear Philips product ownerRemember, to get the most from your Philips prod For Customer UseContents Safety Information Example of Antenna Grounding per National Electrical Code Safety Information cont’dCause the product and cart combination to over- turn Introduction Discs Unsuitable for Recording or Playing Playable DiscsDiscs for Recording and Playing Discs for Playing OnlyGeneral Information Before you begin HookupsDetermining the best possible connection RememberConnecting to a TV Only TV has only an Antenna In jack Hookups cont’dConnecting to a TV and a Cable Box or Satellite Receiver Connecting to a TV Only TV has Component Video In Jacks Connecting to a TV Only TV has an S-Video In Jack Connecting to a TV Only TV has a yellow Cvbs Video In jack Turn on the TV power. Set the TV to the correct Audio/VideoSet Analog output accordingly. See Cable TV Signal DV S-VIDEO Video Audio Left Right Press STANDBYy to turn on the Recorder Initial SetupInstructions continue on the next To choose the language you prefer, then press OKChoose the preferred TV Shape, then press OK Initial Setup cont’dFrom previous Quick Disc Playback To stop play at any time, press Stop CQuick Recording Remote Control Remote Control cont’d Front Panel Rear Panel Press System MENU. The Installation menu will reappear TV Channel ProgrammingMenu screen, then press to enter the Installation menu VCR Plus+ ChannelsYour time zone While storing the settingPress CH-9to choose Daylight Saving. Press or to Time/Date Manual 11Press System Menu repeatedly to remove all menusMenu Bars Menu BarStatus Box On-screen Symbols, Status BoxOn-screen Symbols Disc status iconsTitles Title Settings MenuIndex Picture Screen Disc BarInformation Boxes Timer Information boxCurrent time no timer recordings are scheduled Tuner Information boxChapter/Track Selection Title/Disc Menus, Chapter/Track SelectionTitle/Disc menus Press Disc Menu during Disc playAudio Language SubtitlesCamera Angle Zoom, Camera AngleZoom During play, press System Menu so Menu Bar 1 appearsPress System Menu during play so Menu Bar 1 appears Still Picture/Frame-by-frame PlaybackSound Forward and Reverse Searching Slow Motion, SearchingSlow Motion Scan Time Search, ScanTime Search Repeat A-B Repeat, Repeat A-BRepeat One-Touch Recording Timer Recording When the Start time is correct, pressPress the Number buttons to enter the PlusCode number Press Timer on the remote controlCH+8 to select VCR Plus+ system, then press From your TV guide, then press OK. If you make a mistakeTimer button.The Timer List will reappear Erasing Timer RecordingsPress OK to erase the timer recording. Timer Cleared will Press Timer repeatedly to remove the menusError Messages Record One Channel/Watch Another Erase this title Title Settings MenuPlay full title Press to return to the Index Picture Screen if necessaryAppend recording Chapter MarkersRecord Settings Editing Disc Information Screen This option is not always available EditingTo select the next Chapter Press FSS to remove the Favorite Scene Selection menuFinalize Disc Playback Control Press System Menu to remove the menusTwice.This will set your code for the first time Access ControlChange Code Press CH-9repeatedly to select Change code, then pressYour four-digit code. See Child LockPress again, then press the Number buttons to enter Child lock will be highlighted. PressScreen. Child Lock should be Locked. See Access Control cont’dLocking or Unlocking Specific Discs 1Insert a DiscParental Level Will stop. Enter the four-digit code to play the DiscYour four-digit code. Child lock will be highlighted Access Control contdChange Country DVD Recorder Features Menu Picture Settings Recorded in the regular formatDigital Output Digital output will be selected. PressAnalog Output Language Settings SAPRemote Control Used Night Mode, Remote Control UsedNight Mode Glossary Helpful Hints Helpful Hints contd Diagnostic Test Specifications Disc Formats SupportedLimited Warranty DVD RecorderInformation Index IB8451E001 3139 246 1336
Top Page Image Contents