Philips SRC3036/27 user manual VCR/DVD/DVR Punch-Through Feature

Page 31

Setup, cont.

Controlling Devices Requiring Separate Power On and Off Buttons, cont.

To turn the TV off, press and release the POWER button to transmit the Power Off button command. This method can be applied similarly to any device and is available for all Modes. Note this feature is not supported by all codes.

VCR/DVD/DVR Punch-Through Feature

This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-Through control from any Mode programmed with TV, SAT or Cable codes to the last VCR, DVD or DVR programmed Mode you used. Normally other types of remotes only punch-through (from another Mode) on the 6 VCR buttons to the device programmed under the VCR Mode button. This is not much use if you are using a DVD programmed under a Mode other than VCR. For example, if you have 2 DVD, VCR or DVR devices programmed into this remote, the last one you accessed on the remote will be the one that has control of the 6 VCR transport buttons when in any other Mode. This feature will not operate if the programmed TV, SAT or Cable code has its own VCR transport button control e.g. a TV Combo, SAT/PVR, etc.

Volume/Mute Control and Punch-Through Feature

This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set (factory default) for all device Modes programmed with “Visual” codes (e.g. TV, VCR, DVD, DVR, SAT & CABLE) and “Audio” codes (e.g. CD & AUDIO) to use their own Volume/Mute control if present. If the programmed “Visual” code has no Volume/Mute operation of its own then those buttons will punch- through control to the TV Mode device without needing to change to TV Mode. Please refer to the next page for more information.

Setup, cont.

Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing.

SettingALLVolume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode.

1.Press and hold the SETUP button until the red indicator turns on, then release the button.

2.Press and hold the MUTE button until the red indicator blinks off, then release the button.

3.Press and release the desired Mode button (TV, VCR, etc.) for Volume/Mute control, the red indicator blinks then stays on.

4.Press and release the MUTE button and the red indicator turns off. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control.

5.All other Modes will now punch-through to your chosen Mode for Volume/Mute control.

6.All “Visual” and “Audio” programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/ Mute buttons will do nothing.

1.Press and hold the SETUP button until the red indicator turns on, then release the button.

2.Press and hold the MUTE button until the red indicator blinks off, then release the button.

3.Press and release the desired Mode button (TV, VCR, etc.), the red indicator blinks then stays on.

4.Press and release the VOLUME- (Down) button, the red indicator blinks then stays on.

5.Press and release the MUTE button and the red indicator turns off.

6.All “Visual” and “Audio” programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control.

12

13

Page 30 Page 32
Image 31
Page 30 Page 32
Contents SRC3036/27 SRU2103/27 Introduction Table of ContentsRECORD, PLAY, STOP, REW, FF, Pause Button Functions Button Functions,DVD Functions SetupCode Search Direct Code Entry Code Search,Code Search by Brand Sleep Timer Code Identification FeatureSetup, VCR/DVD/DVR Punch-Through Feature Limited Lifetime Warranty TroubleshootingIntroducción ÍndiceFunciones de botones Ahorrador de baterías PreparaciónFunciones de DVD con leyendas en azul Instalación de bateríasIngreso Directo de Códigos Preparación,Cronometro de apagado automático Función de Identificación de CódigosFunción de traspaso de VCR/DVD/DVR El Control Remoto no Opera su Producto TV/Videocasetera/EntradaProgrammation des codes Saisie des codes Table des matièresRight Fonctions des touches Fonctions des touches,Configuration Programmation au moyen de la fonction de recherche des codes Configuration suiteMinuteur de mise en veille Fonction d’identification des codesCommande Volume/Mute et fonction d’accès direct Garantie a vie limitée DépannageLe témoin clignote une fois le code programmé Page SRU3006L/27 Code Learning Tips on Learning TV, VCR, CBL, DVD, CD, SAT Selects product to DVD Functions labeled in Blue VCR CBL DVD SAT Code Identification Feature VCR/DVD/DVR Punch-Through Feature Tips On Learning, Code LearningIR Transmitter Finder Feature Learning Commands To Clear all Learned Commands under a mode Clearing CommandsDespejar comandos transferidos para una Nota el botón REC debe oprimirse DOS Veces para grabar Entrada TV/Videocasetera/EntradaProgramacíon con Búsqueda de codigos Función de Identificación de Códigos Función de traspaso de VCR/DVD/DVR Consejos Para el Aprendizaje Transferencia de códigosBúsqueda de transmisor IR infrarrojo Aprendizaje de ComandosEl Control Remoto no Opera Algunas Funciones de su Aparato Despejando ComandosIntroduction Fonctions des touches Fonctions DVD et SAT Remarque on doit appuyer deux fois sur la touche REC Input Fonctions DVD en bleuConfiguration suite Contrôle des combinés Accès direct aux modes VCR/DVD/DVR Conseils Sur L’Apprentissage Apprentissage de codesCommandes D’Enregistrement Pour Effacer Toutes Les Commandes Enregistrees Sous Un Mode Suppression des commandes
Top Page Image Contents