2Press and hold either the Left or the Right button.
The icon turns around to show a back view of the remote control.
With Device menu open, hold down the Left or Right button ...
Back view of the remote control (source won’t be switched.)
... tap the device you want to operate.
The remote control displays a control panel for the device without switching the input source.
3Still holding down the Left button or Right button, tap the device you want to operate.
You might need to scroll up 
or down 
to find the device you want.
When you choose a device, the icon turns back around, and the remote control displays a control panel for the device you want to operate. Now you can send commands to the device without disrupting the video or audio feed to your monitor or speakers.
NOTE When you choose a device from Home, the input source is always switched (if the button is programmed to switch the source). To switch devices without switching the source, you must use the Device menu.
24Chapter