To view the commands in a macro
To view the commands in a macro while in Use mode:
1Display the macro panel that contains the macro.
2Press and hold the Left button, labeled OPEN. While holding it down, tap the macro you want to open.
Use the scroll buttons 
and 
to view the entire macro.
To execute (play) the macro, press the Right button. When you’re ready to close the macro, press the Left button.
Editing macros
Once you have recorded a macro, you can add, remove, or change the order of commands in the macro. You can also add delays.
NOTE You should add a delay after turning on a device before sending more commands to the device. Some devices recognize infrared commands only after they have had time to “warm up.”
To edit a previously recorded macro
1Display the macro panel that contains the macro.
2Switch the remote control to Record mode: Tap the Mode button 
to
display the Mode menu. Then, tap 
.
3Tap the macro you want to edit.
The contents of the macro appear on the display.
Tap a command to select it.
Add a delay.
Scroll to see more commands in this macro.
Move the selected command up or down in the list.
Delete the selected command.
Editing macros | 57 |