Philips DVDR80 manual AVIDEO Plus+ system appears on the screen

VIDEO Plus+ Manual Home

Please enter the PlusCode programming number and press OK to confirm.

= = = = = = = = =

Grid	Search	Schedule		Info
No programmes
			M2	Once 0

4Enter the entire PlusCode number. This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings magazine.

e.g.: 5-234-89 or 5 234 89

Enter 523489 for the PlusCode number.

Use therefore the number buttons 0..9 on the remote control.

If you make a mistake you can press D or the green action button to go back a position.

5 Confirm with OK .

VIDEO Plus+ Manual Home

Please enter the PlusCode programming number and press OK to confirm.

1 2 3 4 5 = = = =

Grid		Search		Schedule		Info
Watch/Record					Qual.	Freq. Timing
21-Oct	20:00 21:30		BBC1		M2	Once 0

a'VIDEO Plus+ system' appears on the screen

b This message appears when the TV channel has not been assigned in the GUIDE Plus+® system yet.

To change channel data, proceed as follows:

1Press P+ A .

2Select 'Editor' with C .

3Select the TV channel using P- B or P+ A .

4 Press C to go to the right tile.

In case you can receive the selected channel only via an external receiver, press the red button to select the corresponding source.

5 Press the green button.

6 Enter the programme number of the TV channel using the number buttons.

If the source you have selected is an external receiver, enter the programme number that you would also enter at the external receiver for this TV channel.

7 Confirm with OK .

aThe following message appears on the screen: 'PlusCode number

wrong'

b The entered PlusCode number is incorrect. Repeat the entry or end with TIMER s .

b Check time/date (see chapter 'Installing your DVD	recorder', section
'Setting the time & date').	Problem

6The decoded data appears after confirmation.

You can use the colour buttons to make the following settings. First, the right tile must be highlighted ( C button). Check the functions (descriptions) in the corresponding colour field before pressing a button.

Extending end time
Enter the minutes you want the recording to last longer using the yellow
button.
Activate 'VPS/PDC'
Keep pressing the yellow action button until 'VPS/PDC' appears instead of the
time.
Setting up repeat recordings
You can choose from the following settings with the green action button:
'Frequency':'Once': single recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the same day
e.g. Monday).
Entering the recording quality
You can choose from the following settings in the right tile using the red	Tip
action button: 'M1, M2, M2x, M3, M4, M6, M8'.

90 Programming a recording (TIMER)