Philips DVDR80 manual NexTView Link, Problem solving for programmed, Recordings

'NexTView Link'

		This DVD recorder is equipped with the 'NexTView Link' feature. If your television is also
		equipped with 'NexTView', you can mark TV programmes on the television for programming.
		These TV programmes will automatically be transmitted to a TIMER block on the DVD
		recorder.
		For more information, read the instruction manual of your TV set.
		Problem solving for programmed
		recordings
PROBLEM	SOLUTION
The DVD recorder is	bWhile a programmed recording is being made, you cannot operate your DVD recorder manually.
not responding	If you want to cancel the programmed recording, press STANDBY m .
'Switch off, timer	bThe DVD recorder was switched on a few minutes before the start of a programmed recording.
recording' flashes on	Switch off the DVD recorder using STANDBY m . A programmed recording (timer) will only
the TV screen.	function if the DVD recorder is switched off ( STANDBY m button).
Error message: 'Insert	bEither a disc has not been inserted or the disc cannot be used for recording. Insert a disc on
	which recordings can be made.
recordable disc'	Search the position on the disc where you want the recording to begin.
	Switch off the DVD recorder using STANDBY m .
The error message	bA write-protected disc has been inserted. Undo the write protection (see 'Preventing accidental
'Disc locked' appears
	erasing of discs' in 'Manual recording') or insert a different disc.
briefly on the screen.

94 Programming a recording (TIMER)