Philips DVDR80 How to change or delete a programmed recording Timer, Delete programmed recording

How to change or delete a programmed recording (TIMER)

ENGLISH

Quality		Frequency		VPS/PDC		Home
Recording quality M2, Single recording
Grid		Search		Schedule		Info
Watch/Record					Qual.	Freq. Timing
21-Oct	20:00 21:30		BBC1		M2	Once	+0
21-Oct	Matrix				M2	Once	0

1Switch on the TV set. If required, select the programme number for the DVD recorder.

2Press TIMER s on the remote control while the DVD recorder is switched on. The 'Schedule' screen will appear.

3Use P- B or P+ A to select the programmed recording you want to change or delete.

Depending on the programming method (using GUIDE Plus+® system, with/without VIDEO Plus+® system), it is not possible to carry out certain changes using the function buttons. Therefore, always check the function of the corresponding button (description in the colour field) before pressing the button.

Delete programmed recording

Press the red action button in the left tile.

Changing the TV channel

You can make this change only for recordings that were not set using the 'Grid' screen.

In the case of recordings using the 'Grid' screen, centre tile is not available.

1Select the centre tile with C .

2 Press the yellow function button.

3 Select the TV channel you want using P- B , P+ A , D , C . 4 Confirm with OK .

Activate VPS/PDC

Keep pressing the yellow function button in the right tile until 'VPS/PDC' appears in the 'Timing' line instead of the time.

Prolonging finish time

For manually programmed recordings, you can only perform this change in the left tile using the green function button.

1Select the right tile with C .

2Select the later time at which the recording is to finish using the yellow function key.

Setting up repeat recordings
You can choose from the following settings in the right tile using the green
function button:
'Frequency' :'Once': Once recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the same
day, e.g. Monday).
Entering recording quality ('Quality')
You can choose one of the following settings in the right tile using the red	Tip
function button. M1, M2, M2x, M3, M4, M6, M8'.

4To end, press TIMER s .

5 Switch off with STANDBY m .

Programming a recording (TIMER) 93