Philips DVDR80 manual Lining up recordings within a title assemble cut

5Select 'Protected' with the P- B button and confirm with OK .

6Press D and then DISC-MENUto terminate.

The entire disc is now protected.

If an attempt is made to record on a protected disc, '￿￿￿￿ ￿￿￿￿' will appear on the display and 'Disc locked' will appear on the screen.

If you later decide to record on	the disc, follow these steps but select	Tip
'Unprotected' at step 5.

ENGLISH

Lining up recordings within a title (assemble cut)

On a recorded DVD+RW disc you can add another recording to an existing title. This recording is added to the title as a 'chapter'. The existing information will be overwritten starting from this point. Titles will also be overwritten that follow the current title depending on the length of the new recording. The recording type (Quality) will be taken from the current title.

To play back this recording, press SYSTEM-MENUand use the C button to select the 'C' (Chapter) symbol. You can also use the T/C key.

For further information, see 'Changing to another title/chapter' in 'Playback'.

What happens with DVD+R discs?
New recordings on 'DVD+R' discs can only be added after existing recordings.	?
It is not possible to overwrite existing recordings on 'DVD+R' discs.

1In the index display, find the title to which the new recording is to be added.

2Look at the last minute of the old recording (playback)

3Press PAUSE 9 on the remote control at the position where the new recording is to go. '9' will appear on the screen.

4To monitor the recording you can press MONITOR to switch to the internal tuner.

5Now start recording as usual by pressing REC/OTR n on the remote control.

The new recording will be inserted.

6 Stop recording with STOP h .

Manual recording 73