Philips DVDR80 Language settings, For receivers/amplifiers with digital multi sound decoders

Digital output Analogue output Night mode

Sound

All

Stereo

Off

	ENGLISH
Sound settings

Depending on which audio outputs are used, you can select the settings in this menu.

If you only use the analogue audio output ( OUT AUDIO L/R ), select the settings 'Off' in the 'Digital output' menu.

'Digital output'

You can select one of the following settings for devices that are connected to the COAX OUT or OPTICAL AUDIO OUT sockets:

'All': Dolby Digital and DTS signals are fed unaltered to the digital output. MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

For receivers/amplifiers with digital multi sound decoders .

'PCM only: Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code

Modulation).
For receivers/amplifiers without digital multi sound decoders	.
'Off: Digital output switched off.
For devices with analogue audio input.

'Analogue output'

For devices connected to the analogue audio output ( OUT AUDIO L/R ), you can select from the following settings.

'Stereo': For devices without DolbySurround or TruSurround. Use this setting if the DVD recorder is only connected to a stereo TV set.

'Surround: Dolby Digital and MPEG-2 multi-channel are mixed down to a DOLBY surround-compatible two-channel output signal.

For devices with Dolby Surround Pro Logic decoder .

Audio Language Recording audio Subtitle Menu

Language

English

Language 1

English

English

'Night mode'

Night mode optimises the sound for playback at low volume. You are therefore less likely to disturb your neighbours. This only works for Dolby Digital audio on DVD video discs.

Language settings

You can choose the following settings in this menu:

'Audio Language'

Playback audio language

'Recording audio'

Selection of audio recording for bilingual programmes

User preferences 97