Philips CCA134AT owner manual You have completed the steps on pages, VCR PLUS+ Program

Page 40

40 Timer Recording With the VCR Plus+ Programming System

Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:

●The clock has been set. If not, CLOCK MUST BE SET appears.

●Channels are programmed.

●There is a tape in the TV/VCR (make sure the tape’s record tab is intact and the tape is long enough to record the program).

●You have completed the steps on pages 38-39.

POWER		EJECT
SLEEP/WAKE UP	SPEED	MEMORY
REC/OTR		PAUSE/STILL

Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.

1

Press the COMBI button, then press the VCR PLUS+/ENTER button.

	PLAY		3
REW	STOP	F.FWD	3
MENU	STATUS/EXIT	CLEAR

1 2 3

CH.

4 5 6

VCR PLUS+ PROGRAM

PLUS CODE : – – – – – – – –

1

TO END PRESS EXIT

2

Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program). Finally, press the VCR

PLUS+/ENTER button.

VCR PLUS+ PROGRAM

PLUS CODE : 95557 – – –

TO SET PRESS VCR +

TO CORRECT PRESS CLEAR

TO END PRESS EXIT

7		8	9
A.CH		0		VOL.
				VOL.
CABLE/DBS	COMBI
		VCR PLUS+
VAR.SLOW			/ENTER	MUTE
TRACKING			F.ADV	SLOW
SMART		SKIP	INDEX
PICTURE		SEARCH SEARCH

2

3

Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The VCR will record every day from Monday to Friday

– starting at the same time and recording for the same length of time.

●WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.

VCR PLUS+ PROGRAM

>ONCE

DAILY (MON - FRI)

WEEKLY

SELECT ▲▼ CHOOSE B

TO END PRESS EXIT

Helpful Hints

•You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 33.

•If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ENTER button, the number you entered was incorrect (for exam- ple, too short). If this happens, enter the correct number.

•CLASH may flash on the screen after you complete step 2. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out.

Image 40

Contents CCA134AT Dear Philips Magnavox product owner For Customer UseModel No Serial No RA T I OSafety Precautions FeaturesIntroduction Table of Contents Putting Batteries in the Remote Control Using the Remote ControlTV/VCR Maintenance Erasure PreventionHook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRF coaxial cable Not supplied Rod AntennaHooking Up the TV/VCR cont’d Bent pinCrooked Pin Straight Pin Cable PlugTurning On the TV/VCR Press the Menu button. The screen shown below will appearSelect Language English Español Select KL or Press Menu to ContinuePRIM. Setup VCR Program VCR Setup Caption ReminderLanguage Selection Press the Combi button, then press the Menu buttonAutomatic Channel Setup Press BAdding/Deleting Channels Press the PLAY/o button or the STOP/p button to selectRepeat steps 3-4 to add or delete other channels Programming of the channel you added or deleted will appearManual Clock Setting Setting the ClockCable Box users must set the clock manually SET Manual Clock Time Month To Correct Press Clear To END Press ExitDate To Correct Press Clear To END Press ExitSetting the Clock cont’d Automatic PBS Channel SelectionWait for the TV/VCR to find TimeSET Auto Clock Time NOW SearchingManual PBS Channel Selection Use the Number buttons to select your PBS station NOW Searching flashes on the TV/VCR screenWait for the TV/VCR to find the time Auto Clock PBS CH Time Date NOW Searching To END Press ExitDaylight-Savings Time Primary SetupTime Daylight Savings Time Time Zone PRIM. SETUP. Then, press the F.FWD/B buttonPress the PLAY/ button or the STOP/ button to select Setting the Remote to Operate a Cable Box/DBS Cable BOX CodesSetting the Remote to Operate a Cable Box/DBS cont’d Front Panel AC Power Cord Rear PanelANTenna Jack Connect your antenna or cable here. Details are on page sixRemote Control Buttons VOLume m/n Button PAUSE/STILL ButtonMemory Button REWind/ ButtonAdjusting the Picture Controls Adjust the picture control. Refer to the chart onWhen you finish, press the STATUS/EXIT button Press the REWind/ button or the F.FWD/B button toAdjusting the Picture Controls cont’d Decrease IncreaseMore brilliant SofterOn-Screen Status Displays If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on If you select Status OFFPlaying Insert a tape in the TV/VCRRecording Power button to turn on the TV/VCR, if necessaryPress the RECord/OTR button once to start recording OTR Length Press OTR Cancel Press ClearOTR Rerecording Tape Duplication Different brands of equipment may operate differentlyVCR Program VCR Setup Caption VCR Setup ONE Time Play Repeat Play ON-SCREEN ModeDefeat Recording Follow the steps below to prevent accidental recordingDaily Timer RecordingSelect Program Number To END Press Exit ONE Time Program Channel Time on Time OFF To Correct Press Clear To END Press ExitTimer Recording cont’d Checking or Clearing Timer Recordings TV Channels Setting Up the VCR Plus+ Programming SystemStation Examine the lists on VCR PLUS+ Cross REF. MAPTo Select CH Press then Enter CH NO. to END Press Exit VCR PLUS+ Cross REF. MAP VCR PLUS+ CABLE/TVVCR PLUS+ Program You have completed the steps on pagesTo SET Press VCR + To Correct Press Clear To END Press Exit Timer Recording With the VCR Plus+ Programming System cont’d Real-Time Counter Memory Appear on the screenVCR Program VCR Setup VCR Setup ONE Time PlayB Repeat Play Repeat PlayFlashing a will become a flashing B RepeatPlayback Options Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureBlue Background GroundSmartLock To block ratings, follow the steps belowRatings are defined on SmartLock cont’dExample Specific Sub-ratings To change the access code, follow these steps After you enter the code, the Smartlock menu will appearBlocked Ratings To check the SmartLock settings, follow these stepsTV-Y7 TV-G Timer during a recording Sleep TimerPress the Combi button, then press the SLEEP/WAKE UP button Timer Sleep Wake UP TV on ON-TIME Timer Sleep Wake UPClosed Caption ExampleMenu ScreenStandard Closed Captions Closed Caption cont’dHalf-screen text Volume Bar Automatic Operation Features TV Reset Smart PictureIf another remote control beeps Press the Mute button, then press the PAUSE/STILL buttonReminder Reminder Brightness Picture Color Tint SharpnessTape in the TV/VCR Index Search Enter Index NumberSpecifications Glossary Helpful Hints Helpful Hints cont’d Please contact Philips at French Speaking English Speaking Limited WarrantyModel # Serial # Index Supplied Accessories