Display the TV clock
1.While you watch TV, press 
OPTIONS.
2.Select [Clock], then press OK.
The clock is displayed on the top
Change the clock mode
You can change the clock mode to automatic or manual. By default, it is set to automatic mode, which automatically synchronises it to Coordinated Universal Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to [Manual].
1.While you watch TV, press 
.
2.Select [Setup] > [TV settings] > [General
settings].
3.Select [Clock] > [Auto clock mode].
4.Select [Automatic], [Manual] or [Country dependent], then press OK.
Change the time zone
In countries with clock transmission data, you can change the time zone if [Auto clock
mode] > [Automatic] or [Country dependent] is selected.
1.In the [Clock] menu, select [Time zone].
2.Select your time zone, then press OK.
Set daylight saving time
In countries with clock transmission data, you
can enable or disable daylight saving time if [Auto clock mode] > [Automatic] or
[Country dependent] is selected.
1.In the [Clock] menu, select [Daylight saving].
2.Select [Standard time] or [Daylight saving time], then press OK.
Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to [Manual].
1.In the [Clock] menu, select [Date] or [Time], then press OK.
2.Set the time or date with the Navigation buttons.
3.Select [Done], then press OK.
Sleep timer |
| |
You can switch the TV to standby after a | English | |
specified time. During the countdown to the | ||
| ||
specified time, you can switch off your TV |
| |
earlier or reset the sleep timer. |
|
1.Press 
.
2.Select [Setup] > [TV settings] > [General
settings] > [Sleep timer].
3. Select the sleep timer duration.
The sleep timer can be set up for to 180 minutes. To switch off the sleep timer, set it to zero minutes.
4.Press OK to activate the sleeptimer. After the specified time, the TV switches to standby.
Child lock
To protect children from unsuitable TV programmes, you can lock the TV or block age rated programmes.
Set or change the child lock code
1.Press 
.
2.Select [Setup] > [Channel settings] or
[Satellite settings] > [Child lock].
3.Select [Set code] or [Change code].
4.Enter the code with the Numeric buttons.
Tip: If you access the channels from the channel list, you are prompted to enter your lock code. If you forget your code, enter ‘8888’ to override any existing codes.
Lock or unlock channels
1.In the child lock menu, select [Channel lock].
2.Enter the child lock code with the Numeric buttons.
3.Select the channels to lock or unlock. Restart the TV to activate the lock. Note:
If you access the channels from the channel list, you are prompted to enter your lock code.
EN 33