Philips PFL50X8K/12, PFL50X8T/12, PFL50X8T/60, PFL50X8H/12 Control devices, Select speaker output

Page 57

Switch on EasyLink

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3. Select [EasyLink] > [On], then press OK.

Control devices

If you connect multiple HDMI-CEC devices that support this setting, you can control all such devices through the TV remote control.

Note: This is an advanced setting. Devices that do not support this setting cannot respond to the TV remote control.

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink] > [EasyLink remote control].

3.Select [On] or [Off], then press OK. Tips:

∙To switch back to TV control, press , then select [Watch TV].

∙To control another device, press , then select the device from the Home menu.

EasyLink buttons

You can control HDMI-CEC compliant devices with the following buttons on the TV remote control:

∙: Switch the TV and the connected device on or to standby.

∙Play buttons: Control video or music play.

∙Numeric buttons: Select a title, chapter or track.

∙OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu.

∙: Display the TV Home menu.

Switch off connecting devices

You can also set the TV to switch off the connecting HDMI-CEC compliant devices if they are not the active source. The TV switches the connecting device to standby after 10 minutes of inactivity.

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

English

3. Select [Auto switch off devices] > [On],

 

then press OK.

 

Select speaker output

If a connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure you connect the device to the

HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI

(Page 45).

Switch on HDMI ARC

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [HDMI 1 - ARC].

3.Select one of the following, then press OK.

∙ [On]: Hear the TV audio through the connected HDMI-ARC compliant

device.

∙ [Off]: Hear the TV audio through the TV speakers, or through a device connected through the digital audio out connector.

Note: Make sure that all HDMI-CEC settings are properly set up on the connected device. Set up TV speakers

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [TV speakers].

3.Select an option, then press OK: ∙ [Off]: Switch off TV speakers. ∙ [On]: Switch on TV speakers.

∙ [EasyLink]: Switch off TV speakers and stream TV audio to a connected HDMI-CEC audio device.

∙ [EasyLink autostart]: When a HDMI- CEC audio device is connected, automatically switch off TV speakers and stream TV audio to the device.

Change TV audio streaming

You can switch audio between TV speakers and a connected amplifier at any time.

EN 57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents PFL50x8H/12 PFL50x8K/12 PFL50x8T/12 PFL50x8T/60 PFL50x8M/08 Contents Safety PrecautionsRisk of electric shock or fire Care 3D health warningScreen Legal Placement tips3D glasses Lock the TVOpen source Pixel characteristicsCE compliance Compliance with EMFTrademarks and copyrights SustainabilityEnergy efficiency This TV is designed with energy-efficientRecycling Help and support Remote control Sensors and indicatorsTV controls Rear controlsOn-screen remote control EasyLink controlsSmartphone control Adjust TV volume Switch TV on or offSwitch the TV on Watch TVManage favourite channels Switch TV channelsManage channel lists Filter channelsDevices Change device settings Use picture and sound presetsWatch connected devices Select the channel to lock, then pressChange picture format View programme guideWhat you can do From the broadcasterWatch 3D What you needStart 3D Switch on lounge light Switch onTo switch Ambilight on or off, select On or Off AmbilightSet up media sharing Change settingsPlay multimedia files Play files from computerPlay options Play files from USB devicePlay DivX VOD Video On Demand Smart TV∙ To stop the music, press Music options ∙ Repeat Select Repeat to play aNew Access Smart TV appsInteractive TV Smart TV optionsRent online videos You can identify channels that offer Access interactive TVInstall USB hard drive Pause TV∙ You can pause a programme for a maximum of 90 minutes Record TV shows Pause a live TV broadcast∙ Tune your TV to receive digital TV Schedule recordings Start recordingOne-touch recording View programme informationUse Skype Watch recordingsDelete recordings Manage contacts Start SkypeOnline status Make voice and video callsMake a voice call Select the contact, then press OKManage voicemails Skype settingsView Text Play gamesSet locks and timers Sleep timer You can switch the TV to standby after aChild lock Parental rating More picture settings Settings assistantBrilliant, high-definition image Advanced sharpness Enable Picture and soundAudio format More sound settingsAutomatic installation Reset picture and soundInstall analogue channels Install digital channelsAutomatic update Update channel listFine-tune analogue channels Copy channelsInstall satellite channels Satellite settingsAdd and remove satellites Language settingsMenu language Audio languageUniversal access settings Update software Other settingsHome mode TV demoUpdate from digital broadcast Update with USB∙ If a power failure occurs during UpgradeReset all Update from the InternetYou can also update the TV software About cables Cable qualityPb Pr Connect devices Connect antennaBlu-ray or DVD disc player Connect the antenna to the TVTV receiver Connect the digital TV receiver to the TV with a Scart cable Video recorderGame console Connect the recorder to the TV with a Scart cableConnect the game console to the TV with an Hdmi cable Home theatre Connect the digital camera to the TV with a USB cable Digital cameraDigital camcorder USB storage device Connect more devicesComputer Connect the computer to the TV with an Hdmi cable∙ If you need extra USB connectors, use a USB hub Video call cameraKeyboard and mouse If you add or remove a device, update the source list Update the source listWatch connected devices Select a deviceChange device settings Set up EasyLink devicesChange the device type One-touch playSelect speaker output Control devicesRetain picture quality Connect to a network and the InternetMaximise video display ConnectWiFi integrated Wired connectionNetwork settings Connect a CAM Conditional Access ModuleSwitch on Miracast Clear Wi-Fi Miracast devices Switch on remote recordingPush the CAM in as far as it will go Access CAM servicesChannel issues General issuesYou want to install TV channels Installing analogue or digital channels. If youSound issues Picture issuesNetwork issues Connection issuesThere are problems with Hdmi devices USB device content is not displayedContact Philips Are printed on the back of the TV and onPackaging Display resolutions Power and receptionDisplay and sound MultimediaJpeg *.jpg, *.jpeg, *.mpo Supported audio/video formats Supported audio formats Connectivity ∙ USB 1 ∙ Headphones Stereo 3.5 mm mini-jackHelp version UMv 500812125003Index 3D, switch off AmbilightLounge light Network, TV name Universal access, enable From Koninklijke Philips Electronics N.V
Top Page Image Contents