Philips PFL50X8T/60 Set up EasyLink devices, Change device settings, Change the device type

1.Press SOURCE.

2.Press OPTIONS.

3.Select [Scan connections], then press OK.

4.Follow the onscreen instructions.

Change device settings

Change the device type

You can change the device type to easily access it from the Source menu.

1.Press SOURCE.

2.Select the device, then press [Device type].

3.Select a suitable device type, then press OK.

Rename a device

You can rename a device after it is connected to the TV.

1.Press SOURCE.

2.Select the connector, then press [Rename].

3.Use the on-screen keypad to enter a new name.

4.When complete, select [Done], then press OK.

Reset device settings

You can reset the type and name of the device to default settings.

1.In the [Source] menu, select the device and press OPTIONS.

2.Select [Original name and icon], then press OK.

Set up EasyLink devices

What you can do

You can get the most out of your HDMI- CEC-compliant devices with Philips EasyLink enhanced control features. Connect your HDMI-CEC compliant devices through HDMI to your TV and control them at the same time with your TV remote control.

Note: Other brands describe HDMI-CEC functionality differently. Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink.

EN 56

After you have switched on Philips EasyLink, the following features are available:

One-touch play

When you play an HDMI-CEC compliant device, the TV switches on from standby and switches to the correct source.

One-touch standby

When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode.

Auto switch off inactive devices

If a HDMI-CEC compliant device has been inactive for some time, it switches to standby mode.

EasyLink remote control

You can control multiple HDMI-CEC compliant devices with your TV remote control.

System audio control

If you connect an HDMI-CEC compliant device that includes speakers through the HDMI ARC connector, you can choose to hear the TV audio from those speakers instead of the TV speakers.

Retain picture quality

If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link to retain picture quality.

Maximise display for subtitled video

Some video subtitles can create a separate subtitle bar under the video, which limits the video display area. To maximise the video display area, you can switch on auto subtitle shift and display the subtitles on the video image.

What you need

∙Connect an HDMI-CEC compliant device to the TV. You can connect

more than one HDMI-CEC device. See Connect your TV > Connect devices (Page 46).

∙Configure each HDMI-CEC compliant device properly.

∙Switch on EasyLink.