Philips PFL50X8M/08, PFL50X8T/12, PFL50X8T/60 Satellite settings, Install satellite channels

Page 39

Step 1: Check the country setting

1.Switch on the first TV (with the channels that you want to copy to the second TV).

2.Press .

3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.

The country menu is displayed.

4.Make a note of the current setting.

5.Press .

6.Press [Cancel] to exit.

Step 2: Copy channel list to USB

1.Connect a USB storage device to the first TV (with the channels installed on it).

2.Press .

3.Select [Setup] > [Channel settings] or [Satellite settings].

4.Select [Channel installation] > [Copy channel list] > [Copy to USB], then press OK.

The channel list is copied to the USB storage device.

5.Disconnect the USB storage device.

Step 3: Copy channels to a TV with no channels installed

1.Switch on the second TV, on which you want to copy the channel list.

Initial installation starts.

2.Follow the onscreen instructions and select the same country as the TV whose channel list you want to copy.

3.Skip the search for channels.

4.Connect the USB storage device.

5.Press .

6.Select [Setup] > [Channel settings] or [Satellite settings].

7.Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.

The channel list is copied to the TV storage device.

8.Disconnect the USB storage device.

Step 3: Copy channels to a TV with pre- installed channels

1.Switch on the second TV, on which you want to copy the channel list.

2.Press .

3.Select [Setup] > [Search for channels] > [Reinstall channels], then press OK.

The country menu is displayed.

4.

Make sure that the country setting is the

 

same as for the first TV.

English

5.

Press .

 

6.

Press [Cancel] to exit.

 

7.

If the country setting is different, reinstall

 

the second TV to match the country setting

 

 

of the first TV. See Change your TV settings

 

> Reset all (Page 44).

 

8.

Connect the USB storage device to the

 

second TV.

 

9.

Press .

 

10. Select [Setup] > [Channel settings] or

 

[Satellite settings].

11. Select [Channel installation] > [Copy channel list] > [Copy to TV], then press OK.

The channel list is copied to the second TV. 12. Disconnect the USB storage device.

Satellite settings

What you can do

This TV can receive signals from 4 different low noise block-down converters (LNBs). An LNB is mounted at the end pole of the dish antenna and captures signals from a satellite.

Note:

∙Satellite reception is available for certain models only. [Search for satellite] is only available if the TV supports DVB-S.

∙To receive satellite channels, connect a satellite receiver to the SAT connector on your TV.

Install satellite channels

Reinstall satellites

1. While you watch TV, press .

2.Select [Setup] > [Search for satellite] > [Reinstall satellites].

3.Follow the onscreen instructions to complete the installation.

4.Once complete, select [Finish], then press OK.

EN 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents PFL50x8H/12 PFL50x8K/12 PFL50x8T/12 PFL50x8T/60 PFL50x8M/08 Contents Safety PrecautionsRisk of electric shock or fire Care 3D health warningScreen Lock the TV Placement tipsLegal 3D glassesCompliance with EMF Pixel characteristicsOpen source CE complianceThis TV is designed with energy-efficient SustainabilityTrademarks and copyrights Energy efficiencyRecycling Help and support Rear controls Sensors and indicatorsRemote control TV controlsOn-screen remote control EasyLink controlsSmartphone control Watch TV Switch TV on or offAdjust TV volume Switch the TV onFilter channels Switch TV channelsManage favourite channels Manage channel listsSelect the channel to lock, then press Use picture and sound presetsDevices Change device settings Watch connected devicesFrom the broadcaster View programme guideChange picture format What you can doWatch 3D What you needStart 3D Ambilight Switch onSwitch on lounge light To switch Ambilight on or off, select On or OffPlay files from computer Change settingsSet up media sharing Play multimedia filesPlay options Play files from USB device∙ Repeat Select Repeat to play a Smart TVPlay DivX VOD Video On Demand ∙ To stop the music, press Music optionsNew Access Smart TV appsInteractive TV Smart TV optionsRent online videos You can identify channels that offer Access interactive TVInstall USB hard drive Pause TV∙ You can pause a programme for a maximum of 90 minutes Record TV shows Pause a live TV broadcast∙ Tune your TV to receive digital TV View programme information Start recordingSchedule recordings One-touch recordingUse Skype Watch recordingsDelete recordings Manage contacts Start SkypeSelect the contact, then press OK Make voice and video callsOnline status Make a voice callManage voicemails Skype settingsView Text Play gamesSet locks and timers Sleep timer You can switch the TV to standby after aChild lock Parental rating Picture and sound Settings assistantMore picture settings Brilliant, high-definition image Advanced sharpness Enable Audio format More sound settingsInstall digital channels Reset picture and soundAutomatic installation Install analogue channelsCopy channels Update channel listAutomatic update Fine-tune analogue channelsInstall satellite channels Satellite settingsAudio language Language settingsAdd and remove satellites Menu languageUniversal access settings TV demo Other settingsUpdate software Home modeUpgrade Update with USBUpdate from digital broadcast ∙ If a power failure occurs duringReset all Update from the InternetYou can also update the TV software About cables Cable qualityPb Pr Connect the antenna to the TV Connect antennaConnect devices Blu-ray or DVD disc playerTV receiver Connect the digital TV receiver to the TV with a Scart cable Video recorderGame console Connect the recorder to the TV with a Scart cableConnect the game console to the TV with an Hdmi cable Home theatre Connect the digital camera to the TV with a USB cable Digital cameraDigital camcorder Connect the computer to the TV with an Hdmi cable Connect more devicesUSB storage device Computer∙ If you need extra USB connectors, use a USB hub Video call cameraKeyboard and mouse Select a device Update the source listIf you add or remove a device, update the source list Watch connected devicesOne-touch play Set up EasyLink devicesChange device settings Change the device typeSelect speaker output Control devicesConnect Connect to a network and the InternetRetain picture quality Maximise video displayWiFi integrated Wired connectionClear Wi-Fi Miracast devices Switch on remote recording Connect a CAM Conditional Access ModuleNetwork settings Switch on MiracastPush the CAM in as far as it will go Access CAM servicesInstalling analogue or digital channels. If you General issuesChannel issues You want to install TV channelsSound issues Picture issuesUSB device content is not displayed Connection issuesNetwork issues There are problems with Hdmi devicesContact Philips Are printed on the back of the TV and onPackaging Multimedia Power and receptionDisplay resolutions Display and soundJpeg *.jpg, *.jpeg, *.mpo Supported audio/video formats Supported audio formats UMv 500812125003 ∙ USB 1 ∙ Headphones Stereo 3.5 mm mini-jackConnectivity Help versionIndex 3D, switch off AmbilightLounge light Network, TV name Universal access, enable From Koninklijke Philips Electronics N.V
Top Page Image Contents