Philips 32HFL4441D/27 Select mode of communication, Select the communication protocol, Store

7Select mode of communication

1	Enter the Philips Hospitality setup menu.
2	Press	to select COMMUNICATION.
3	Press	to select one of the following options :

• COMMUNICATION: To select the communication protocol between the TV and the external device connected to the TV.

• STORE: To store the settings that are modified using the COMMUNICATION menu.

In this way, each TV responds to only one RC that is set to the same color as the TV itself.This prevents interference from each other’s remote control when you watch multiple TVs in a room.

Note

••Multi RC supports a maximum of four TVs in one room and requires the use of special remote controls. For more details, contact your local Philips hospitality representative.

	• PENDANT: To enable or disable the healthcare		Set the TV to a particular RC
	pendant control. This is available only when you select
	COMMUNICATION > OFF.		1	Press	to select COMMUNICATION > MULTI RC.
Select the communication protocol			2	Press	to select REMOTE COLOR.
			3	Press	to toggle through the four colors and select one.
1 Enter the Philips Hospitality setup menu.			4	Press	to select STORE.
				»» The TV is configured to respond to the RC that is set to the same
2	Press	to select COMMUNICATION > COMMUNICATION.		color.
			5	Press MENU and the color button (same color as above) on the
				guest RC simultaneously.
		COMMUNICATION		»» The guest RC is set to the selected color.
			6 Press OK for five seconds while pointing to the TV.
	COMMUNICATION		OFF	»» The TV displays the RC color and the TV color on the screen. If
	STORE		>	they do not match, program the TV and the RC again.
3	Press	to select the communication protocol between the TV

and the set-top box :

•SP-SPI: Most commonly used connection.

•SP-I2C: When the set-top box supports this protocol. When SP-SPI or SP-I2C are selected, there are sub menu items for DCM TYPE and CP.

•SERIAL XPRESS: When the set-top box supports this protocol. When SERIAL XPRESS is selected, the speed must be set.

•MULTI RC: To use Multi RC. See next section.

•SMART RC: To access PayTV channels using Smoovie remote control.

•OFF: To turn off the communication between the TV and the set-top box.

4Press to select Store.

Note

••For SP-SPI and SP-I2C connections, if the set-top box requires a source switch, select DCM TYPE > GENERIC.

Use Multi RC

Multi RC enables control of multiple TVs in a room without any interference from each other’s remote control.

To enable Multi RC, each remote control is set to one of the four colors - blue, green, yellow or red. Each TV in the room is separately programmed to a remote control of one of those colors.

10EN