Enable or disable emergency alert
1 | Enter the Philips Hospitality setup menu. | |
2 | Press | to select DIGITAL SETUP > EMERGENCY ALERT. |
3 | Press | to select one of the following options: |
• ALWAYS: To enable emergency alerts at all times.
• SKIP LOW PRIORITY: To skip the emergency alerts of low priority.
• SKIP MEDIUM LOW PRIORITY: To skip the emergency alerts of medium and low priorities.
Note
••Emergency alerts of high priority cannot be disabled for safety reasons.
14EN
11 Configure the switch-on settings
1 | Enter the Philips Hospitality setup menu. | |
2 | Press | to select CONFIGURATION > SWITCH ON / OSD. |
|
| SWITCH ON / OSD | |
| WELCOME MESSAGE | > | |
| SWITCH ON CHANNEL | TV 2 | |
| SWITCH ON SMARTGUIDE | YES | |
| SWITCH ON VOLUME | 30 | |
| SWITCH ON PIC FMT | WIDESCREEN | |
| POWER ON | LAST STATUS | |
| VOLUME INDICATOR | YES | |
| CHANNEL DISPLAY | ALL | |
3 | Press | to select one of the available options: | |
•WELCOME MESSAGE: To set or clear a welcome message.
•SWITCH ON CHANNEL: To select a channel that is displayed when the TV is turned on. SWITCH ON CHANNEL must be installed and in the active channel ring. Otherwise Locked will be displayed.
•SWITCH ON SMARTGUIDE: When set to Yes the Smart guide will be displayed whenever the TV is powered on.
•SWITCH ON VOLUME: To set the volume that is used each time the TV is turned on.
•SWITCH ON PIC FMT: To configure the picture format that is used for display when the TV is turned on.
•POWER ON: To configure the power condition that will be restored after an AC power interruption.
•VOLUME INDICATOR: To enable or disable the display of volume indicator.
•CHANNEL DISPLAY: To enable or disable the display of channel number and channel name on the screen.
Set the welcome message
1 Enter the Philips Hospitality setup menu.
2 Press 
to select CONFIGURATION > SWITCH ON / OSD >
WELCOME MESSAGE.
3 Press 
to select one of the following options:
•DISPLAY: Select YES to display the welcome message. Select NO to prevent the display of the welcome message.
•LINE 1: To enter the first line of welcome message. Press 
to select a character slot and 
to select an alphanumeric character.
•LINE 2: To enter the second line of welcome message. Press 
to select a character slot and 
to select an alphanumeric character.
•CLEAR: To clear the welcome message.
Note
••You can have a maximum of 20 alphanumeric characters in each line of your welcome message.