•STANDBY FIRMWARE: To download the TV startup data from the USB device. Only used in software download.
•IBOARD NVM: To download the TV settings from the USB device.
•IBOARD FIRMWARE: To update iboard software from the USB device. Only used in software download.
•ALL: To download all the software upgrades from the USB device.
•START: To start the software download.
»» The TV will restart automatically upon the completion of software download.There will be multiple downloads and restart cycles when download ALL is selected.
Note
••“Firmwares” cannot be copied from the TV to USB. (only NVMs may be copied from the TV.)
••The STANDBY FIRMWARE is rarely updated and is not included when SW TYPE > ALL is selected. To update the STANDBY FIRMWARE, the SW TYPE > STANDBY FIRMWARE must be uniquely selected.
Configure the V-chip and closed caption settings
1 Enter the Philips Hospitality setup menu. |
|
|
|
| |
2 | Press to select CONFIGURATION > CC/ | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CC / |
|
|
|
|
| SAVE CC | YES |
|
| |
| CC | ON |
| ||
| DIGITAL CC MODE | CS1 |
| ||
| ANALOG CC MODE | CC1 |
| ||
|
| NO |
| ||
| SAVED | NO |
| ||
|
| > |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
3Press to select one of the following options:
•SAVE CC: Select YES to use the last used CC mode. Select NO to use the CC mode defined in the next option.
•CC: Select a CC mode that is used when the TV is turned on. If you select CONFIGURATION > CC/
•DIGITAL CC MODE: Allows you to select your digital CC options. Select an option from CS1 to CS6. If this option is not available for the current digital channel, the TV will switch to
ANALOG CC MODE.
•ANALOG CC MODE: Allows you to set your analog CC options. Select an option from CC1 to CC4 and TXT1 to TXT4.
•
•SAVED
•
•CLEAR ALL RATINGS: To clear all the ratings.
•US MOVIE RATING: To enable or disable the movie ratings.
•US TV RATING: To enable or disable the TV ratings.
•D. RATING: To configure the downloadable
14 Clone data (TV Setup Data)
1 Enter the Philips Hospitality setup menu.
2 Press to select SMARTCLONE > SOURCE.
3 Press to select one of the following options:
• USB: To download clone data (TV setup data) from a USB device to a TV or a TV to a USB device.
• RF: To download clone data (TV setup data) from an RF channel to a TV.
SMARTCLONE |
|
SOURCE | RF |
CABLE TUNING | YES |
RF CHANNEL NUMBER | 87 |
RF TO TV | > |
Download clone data from a USB device
1Enter the Philips Hospitality setup menu.
2 Press to select smartclone SOURCE.
3 Press to select USB.
|
|
| SW DOWNLOAD |
| SOURCE |
| USB |
| DIRECTION | TV TO USB | |
| SW TYPE |
| IBOARD NVM |
| START |
| > |
4 | Press | to select one of the following options: |
•USB TO TV: To download clone data (TV setup data) from a USB device to TV.
•TV TO USB: To upload clone data (TV setup data) from a TV to a USB device.
Download clone data from an RF channel
1Enter the Philips Hospitality setup menu.
2 Press to select smartclone SOURCE.
3 Press to select RF.
English
EN 19