6.5Uninstall or reinstall channels
You can uninstall a stored channel or reinstall an uninstalled channel.
1.Press MENU on the remote control and select Install > Channel installation > Rearrange.
2.Press Æ to enter the Rearrange list.
3.Press Î or ï to select the channel you want to uninstall or reinstall.
4.Press the green key to uninstall or reinstall the channel.
5.Press MENU to exit.
6.6Manually update the channel list
You can manually upddate the channel list.
1.Press MENU on the remote control and select Install > Channel installation > Installation update.
2.Press Æ to enter the Installation update menu. Start now is highlighted.
3.Press OK.
4.Press the green key to start the upddate. This may take a few minutes.
5.When the upddate is complete, press the red key to return to the Channel installation menu.
6.Press MENU to exit.
6.7Test digital reception
If using digital broadcasts, you can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish.
1.Press MENU on the remote control and select Install > Channel installation > Digital:Test reception.
2.Press OK.
3.Press the green key to automatically start the test or manually enter the frequency of the channel you want to test. If the signal quality and strength is poor, reposition the antenna or satellite dish and retest.
4.When complete, press the yellow key to store the frequency.
5.Press the red key to return to the Channel installation menu.
6.Press MENU to exit.
DDNote
If you have further problems with the reception of your digital broadcast, contact a specialised installer.
EN