7.4Setup devices
Assign a channel decoder
Decoders that decode digital channels can be connected to SCART.You have to assign the TV channel as a channel to be decoded.Then assign the connection where the decoder is connected.
1.Press MENU on the remote control and select Install > Decoder.
| PHILIPS |
TV Menu | Smart settings |
Smart settings | Personal |
Picture | Vivid |
Sound | Standard |
Features | Movie |
Install | Power saver |
2.Press Æ to enter the list.
3.Press Î or ï to select the channel to decode.
4.Press OK to select or unselect the channel.
5.Press Í to return to the previous menu.
6.Press MENU to exit.
7.5 Use Philips EasyLink
Your TV suppports Philips EasyLink, which | EN | |
enables | ||
| ||
between |
| |
devices must be connected to your TV via |
| |
HDMI and assigned as described in Section 7.4.1 |
| |
Assign devices to connectors. |
|
Enable or disable EasyLink
1.Press MENU on the remote control then select Install > Preferences > EasyLink.
2.Select On or Off.
Use one-touch play
Use System standby
System standby enables you to press and hold the POWER button on, for example, your TV remote control.This switches your TV and all connected HDMI devices on or to standby mode.You can perform system standby using remote controls from any of the connected HDMI devices.