Philips 19PFL3403D/10 user manual Safety, EN-3

Page 4

1 Important

Congratulations on your purchase and welcome to Philips!

Read this user manual before you start to use this product.

Pay close attention to this section and follow the safety and screen care instructions.The product warranty does not appply if damage is caused by failing to follow these instructions.

To fully benefit from the suppport that Philips offers, register your product at wwww.philips.com/welcome.

The model and serial number of your TV can be found on the back and side of the TV as well as on the packaging.

1.1Safety

The appparatus must be connected to a mains socket outlet with a protected earthed connection.

If transporting the TV in low temperatures (less than 5°C), open the box and wait until the TV matches the ambient temperature of the room before unpacking.

To avoid short circuit, do not expose the TV, remote control or remote control batteries to rain or water.

Do not place vessels of water or other liquids on top of or near the TV. Spilling liquids on the TV can cause electric shock. If liquids are spilt on the TV, do not operate the TV. Immediately disconnect the TV from the mains and have the TV checked by a qualified technician.

Do not insert any strange object into the ventilation slot.This might lead to damage of TV.

To avoid risk of fire or electric shock, do not place the TV, remote control or remote control batteries near naked flame sources (e.g. lighted candles) and other heat sources including direct sunlight.

Do not install the TV in a confined space such as a bookcase. Leave a space of at least 10cm (four inches) around the TV for ventilation. Be sure air flow is not obstructed.

If placing the TV on a flat, solid surface be sure to use only the suppplied stand. Do not move the TV if the stand is not properly screwed to the TV.

Wall mounting of the TV should only be performed by qualified personnel.The TV must only be mounted on an apppropriate wall bracket and on a wall that can safely hold the weight of the TV. Improper wall mounting can result in severe injury or damage. Do not attempt to wall mount the TV yourself.

If the TV is mounted on a swivel base or swivel arm, ensure no strain is placed on the power cord when the TV is swivelled. Strain on the power cord can loosen connections and cause arcing or fire.

Disconnect the TV from the mains and antenna before lightning storms. During lightning storms do not touch any part of the TV, mains cord or antenna cable.

Be sure that you have full access to the mains cord for easy disconnection of the TV from the mains.

Permanent hearing loss can occur if you use earphones or headpphones at high volumes. Though high volume may sound normal over time, it can damage your hearing.To protect your hearing, limit the amount of time you use earphones or headpphones at high volume.

EN-3

EN

Image 4
Contents Register your product and get support at Table of contents Warranty Safety EN-3Screen care Environmental careYour TV TV overviewRemote control Program up or down Volume up or downPower EN-6Position the TV Get startedWall mount the TV Connect cables Secure the VESA-compatible wall bracket to the TVConnect the antenna cable Locate the TV Antenna connector at the back of the TVConnect the mains cord Insert the remote control batteries Switch on the TVFirst time setup Manage cablesSwitch your TV on/off or to standby Use your TVWatch connected devices Watch TVUse teletext For advanced information on teletext, see DDNote for UK users onlyEN-13 Remote control overview Use more of your TVAccess the main menu Smart settings Picture Sound Feature InstallUse TV menus Use the main menuPress Æ to enter the Picture settings Press Æ to enter the Brightness settingUse the Quick access menu Press ï to select BrightnessAdjust picture and sound settings Adjust picture settingsUse smart settings Picture format See .3.3 Change picture formatChange picture format Super zoom Not for HDNot for HD Movie Expand 169 Not for HDChange to Shop or Home Mode Adjust sound settingsSettings Auto volume leveling ReducesUse advanced teletext features Use Electronic Programme GuideSelect Features Adjust feature settingsAutomatic Automatically switch the TV to standby Sleeptimer Automatically switch the TV on Start timeAutomatically switch the TV off Stop time Lock TV channels or connected devices Auto LockUpdate your TV software Use subtitlesListen to digital radio channels To set parental ratingsInstall channels Automatically install channelsUpdate software digital broadcasts Check your current software versionManually install channels Install channelsSelect your country Select your system DDNoteInstallation menu Search and store new TV channels Rearrange channelsRename channels Fine tune analogue channelsUninstall or reinstall channels Manually update the channel listTest digital reception EN-27Connect devices Common Interface Slot for Conditional Access ModulesConnection overview Select connection quality Hdmi Highest qualityComponent Y Pb Pr Higher quality Scart Good qualityVideo Good quality Video cable Audio L/R cable Red,WhiteComposite Basic quality EN-30Blu-ray Disc player Connect devicesDVD player Satellite receiver HD digital receiverCombined DVD recorder and digital receiver EN-32Separate DVD recorder and receiver DVD recorder and home theatre systemGame console or camcorder Personal ComputerTo connect a PC to the back of the TV EN-34Setup devices Use Philips EasyLinkPrepare TV for digital services Using the Conditional Access ModuleAccess CAM services Push the CAM in as far as it will goSupported display resolutions Computer formats PC PowerVideo formats Tuner / Reception / TransmissionTroubleshooting General TV issuesTV channel issues Picture issuesHdmi connection issues Sound issuesPC connection issues Contact us EN-40Index Screen care Settings Setup devices Sharpness Shop mode SideSmart settings TimersEN-43 EN-44 Koninklijke Philips Electronics N.V. All rights reserved