Philips 19PFL3403D/10 Prepare TV for digital services, Using the Conditional Access Module, EN-36

Page 37

7.6Prepare TV for digital services

Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM) and a Smart card provided by a digital TV service operator.

The CAM may enable several digital services, depending on the operator and services you choose (for example, pay TV). Contact your digital TV service operator for more information about services and terms.

Using the Conditional Access Module

BBWARNING

Switch off your TV before inserting a CAM. Be sure to follow the instructions described below.Wrong insertion of a CAM may damage both the CAM and your TV.

1.Following the directions printed on the CAM, gently insert the CAM into the Common Interface on the side of the TV.

2.Push the CAM in as far as it will go.

3.Turn on the TV and wait for the CAM to be activated.This may take several minutes.

DDNote

Do not remove the CAM from the slot. Removing the CAM will deactivate the digital services.

Access CAM services

After inserting and activating the CAM,

press MENU on the remote control and select TV menu > Features > Common interface.

This menu option is only available if the CAM is correctly inserted and activated. On-screen appplications and content are provided by your digital TV service operator.

EN-36

Image 37
Contents Register your product and get support at Table of contents Warranty EN-3 SafetyEnvironmental care Screen careTV overview Your TVProgram up or down Volume up or down Remote controlPower EN-6Position the TV Get startedWall mount the TV Secure the VESA-compatible wall bracket to the TV Connect cablesConnect the antenna cable Locate the TV Antenna connector at the back of the TVConnect the mains cord Switch on the TV Insert the remote control batteriesFirst time setup Manage cablesUse your TV Switch your TV on/off or to standbyWatch connected devices Watch TVUse teletext For advanced information on teletext, see DDNote for UK users onlyEN-13 Use more of your TV Remote control overviewSmart settings Picture Sound Feature Install Access the main menuUse TV menus Use the main menuPress Æ to enter the Brightness setting Press Æ to enter the Picture settingsUse the Quick access menu Press ï to select BrightnessAdjust picture settings Adjust picture and sound settingsUse smart settings Picture format See .3.3 Change picture formatSuper zoom Not for HD Change picture formatNot for HD Movie Expand 169 Not for HDAdjust sound settings Change to Shop or Home ModeSettings Auto volume leveling ReducesUse Electronic Programme Guide Use advanced teletext featuresSelect Features Adjust feature settingsAutomatic Automatically switch the TV on Start time Automatically switch the TV to standby SleeptimerAutomatically switch the TV off Stop time Lock TV channels or connected devices Auto LockUse subtitles Update your TV softwareListen to digital radio channels To set parental ratingsAutomatically install channels Install channelsUpdate software digital broadcasts Check your current software versionInstall channels Manually install channelsSelect your country Select your system DDNoteRearrange channels Installation menu Search and store new TV channelsRename channels Fine tune analogue channelsManually update the channel list Uninstall or reinstall channelsTest digital reception EN-27Connect devices Common Interface Slot for Conditional Access ModulesConnection overview Hdmi Highest quality Select connection qualityComponent Y Pb Pr Higher quality Scart Good qualityVideo cable Audio L/R cable Red,White Video Good qualityComposite Basic quality EN-30Blu-ray Disc player Connect devicesDVD player HD digital receiver Satellite receiverCombined DVD recorder and digital receiver EN-32DVD recorder and home theatre system Separate DVD recorder and receiverPersonal Computer Game console or camcorderTo connect a PC to the back of the TV EN-34Use Philips EasyLink Setup devicesUsing the Conditional Access Module Prepare TV for digital servicesAccess CAM services Push the CAM in as far as it will goPower Supported display resolutions Computer formats PCVideo formats Tuner / Reception / TransmissionGeneral TV issues TroubleshootingTV channel issues Picture issuesHdmi connection issues Sound issuesPC connection issues EN-40 Contact usIndex Setup devices Sharpness Shop mode Side Screen care SettingsSmart settings TimersEN-43 EN-44 Koninklijke Philips Electronics N.V. All rights reserved