installation menu.
Step 2 Search and store new TV channels
1.Press MENU on the remote control and select Install > Channel installation > Analogue: Manual installation > Search.
2.Press Æ to enter the Search menu.
3.Press the red key and the number keys on the remote control to enter the three digit frequency. Alternatively, press the green key to automatically search for the next channel.
4.Press Í when the new channel is found.
5.Select Store as new channel, and press
Æ to enter.
6.Press OK to save this channel.
The channel number will is shown on the screen.
7.Press MENU to exit.
Fine tune analogue channels
You can manually fine tune analogue channels when reception is poor.
1.Press MENU on the remote control and select Install > Channel installation > Analogue: manual installation > Fine tune.
2.Press Æ to enter the Fine tune menu.
3.Press Î or ï to adjust the frequency.
4.Press Î when done.
5.Select Store current channel to store the fine tuned channel under the current channel number.
6.Press Æ to enter.
7.Press OK. Done apppears.
8.Press MENU to exit.
6.3Rearrange channels
1.Press MENU on the remote control and select Install > Channel installation > Rearrange.
2.Press Æ to enter the Rearrange list.
3.Press Î or ï to select the channel you want to rearrange.
4.Press the yellow key to move the channel up the list, or press the blue key to move the channel down the list.
5.Press MENU to exit.
6.4Rename channels
1.Press MENU on the remote control and select Install > Channel installation > Rearrange.
2.Press Æ to enter the Rearrange list.
3.Press Î or ï in the Rearrange list to select the channel you want to rename.
4.Press the red key.
5.Press Í and Æ to select characters or Î and ï to change the characters. Space, numbers
6.Press the green key or OK to finish.
EETip
Delete all characters by pressing the yellow key. Delete only the highlighted character by pressing the blue key.