Philips FTR 9965/12 manual Use of the remote control, Picture format, Signals

Use of the remote control

VGA

press repeatedly to select your computer connected to the VGA or to the DVI (digital RGB) connector.

BRIGHTNESS +/-

to adjust the brightness level of the picture

CONTRAST +/-

to adjust the contrast level of the picture

ZOOM ON/OFF

to activate/de-activate the zoom function.

ZOOM IN/OUT

to adjust the zoom factor and to change the magnification of the picture when zoom is activated.

			POWER
			B
VGA	AV1	AV2	AV3
BRIGHTNESS		CONTRAST
ZOOM ON/OFF	ZOOM IN		ZOOM OUT
MENU			OK

MUTE

V ¬ CH/PR

1 2 3

4 5 6

7 8 9

AV MUTE

0 q

Bto switch to standby or on again (Does not operate when POWER/ STANDBY indicator of the plasma display is off).

MENU to switch the menu on/off

cursor keys to select your choice and to alter a selected adjustment.

OK to activate your choice

VNo function

¬Mute key No function

CH/PR Programme selection

To browse through the sources selected.

AV MUTE to mute the picture or restore it if the plasma display is used in the VGA mode.

When activated a green indicator starts blinking in front of the plasma display.

qPicture format

Press the q key to switch between the different picture formats.

Picture format

Press the q key to switch between the different picture formats.

Note: When the setting of PICTURE SIZE in the OPTIONS 2 menu, p. 10, is off, the picture format of RGB-input pictures will be TRUE in place of NORMAL.

VGA-mode
4:3 signals	Wide signals

Normal/True True

FullFull

6Use of the remote control