Philips FTR 9965/12 manual Select Long Life, ‘ Select Inverse ON, OFF or WT

LONG LIFE

(PLE AUTO)

INVERSE

SCREEN WIPER

PRESS OK TO SET TIMER FUNCTIONS

J SELECT LM ADJUST MENU RETURN

INVERSE/WT

WORKING TIME	•	1h
	•	30m
WAITING TIME	•	h
		m

J SELECT LM ADJUST MENU RETURN

SCREEN WIPER

WORKING TIME • 1h

•30m

WAITING TIME • h

•m

SPEED •

J SELECT LM ADJUST MENU RETURN

DVI ADJ

This control allows you to select the most appropriate setting when the picture input from the DVI input extension is distorted. Select 1, 2 or 3. Note: When you adjust the DVI ADJ., the position of the menu display will change. In such a case, be sure to adjust the position.

LONG LIFE

This control allows you to select a setting to prevent or to reduce burn-in of the screen.

&Select LONG LIFE.

éPress the cursor right to enter the menu.

“Select PLE AUTO or LOCK (only with VGA and DVI inputs).

AUTO automatically adjusts the brightness of the screen to suit the picture quality.

LOCK sets the brightness level to minimum.

‘Select INVERSE ON, OFF or WT.

ON : the picture is displayed alternately between positive and negative image.

WT : the entire screen turns white.

OFF : the inverse mode does not function.

When having selected on, press the OK key to enter the INVERSE/WT menu and to set the timer functions.

Select WORKING TIME and enter the hours (h) and minutes (m) with the cursor keys to select the time the inverse mode has to be active.

Select WAITING TIME and enter the hours (h) and minutes (m) with the cursor keys to select the time after which the inverse mode should become active.

( Select SCREEN WIPER ON or OFF.

Select ON and press the OK key: a white vertical bar is moving from left to right over the screen to prevent burn-in.

Set the timer functions (see the inverse mode) and the speed (from 1, fast, to 5, slow) with the cursor keys in the SCREEN WIPER menu.

RESET

This control allows you to reset all the OPTIONS 1 and 2 settings to the predefined factory values and settings.

& Select RESET. é Press the OK key.

“Select RESET.

When the message SETTING NOW disappears, all the settings are restored to the predefined factory values.

Use of the menus and the menu system 9