Philips FTR 9965/12 Options 2 menu, Setting a computer image to the correct RGB select screen

Press the OK key to confirm.

Frequency menu

This control allows you to check the frequencies the polarities and the resolution of the signals currently being input from a computer.

The menu items cannot be selected nor controlled and are displayed in English only.

Set-up menu

Setting the menu language

& Use the cursor down to select LANGUAGE.

é Use the cursor left/right to select one of the languages which will be used to display the menus.

Note: Select RESET in the OPTIONS 1 menu to reset all the to the predefined factory values and settings.

“

OPTIONS2

RGB SELECT

HD SELECT

PICTURE SIZE

JSELECT M SELECT MENU RETURN

SET-UP

LANGUAGE • ENGLISH •

PRESS OK TO CONFIRM

FREQUENCY

H. FREQUENCY • 43.3 KHZ

V. FREQUENCY • 85.0 KHZ

H. POLARITY • NEGATIVE

V. POLARITY • NEGATIVE

MODE • 9

RESOLUTION • 640 X 480

J SELECT M SELECT MENU RETURN

Options 2 menu

Setting a computer image to the correct RGB select screen

This control allows you to select the most appropriate RGB Select mode for a moving image, such as video mode, wide mode or a digital broadcast.

&Select RGB SELECT with the cursor up/down.

éPress the cursor left/right to select one of the modes in order to display the following signals correctly:

AUTO: automatically selects the suitable mode for the specifications of input signals as listed in the table "Computer input signals supported by this system", see p. 11.

STILL: to display VESA standard signals. Use this mode for a still image from a computer.

MOTION: the video signal will be converted to RGB signals to make the picture more easily viewable. Use this mode for a motion image from a computer.

WIDE 1: when a 852 dot x 480 line signal with a horizontal frequency of

31.7kHz is input, the image may be compressed horizontally.To prevent this, select WIDE 1.

WIDE 2: when a 848 dot x 480 line signal with a horizontal frequency of

31.0kHz is input, the image may be compressed horizontally. To prevent this, select WIDE 2.

DTV: select this mode when watching digital broadcasting (480p).

Setting high definition images to the suitable screen size

This control allows you to set whether the number of vertical lines of the input high definition image is 1035 or 1080.

&Select HD SELECT.

éPress the cursor left/right to select the correct HD mode:

-1080A for special digital broadcasts (e.g. DTC 100)

-1080B for standard digital broadcasts

-1035I for Japanese "High Vision" signal format.

Setting the picture size for RGB input signals

This control allows you to select the picture size mode for RGB input signals ON or OFF.

ON: NORMAL and FULL can be selected for widescreen switching

OFF: TRUE and FULL can be selected for widescreen switching.

OPTIONS 1 and 2 settings

10Use of the menus and the menu system