Use of the menus and the menu system

MAIN MENU

PICTURE

SCREEN

OPTIONS1

OPTIONS2

SET-UP

FREQUENCY

J SELECT M SELECT

MENU OFF

&Press the MENU key on the remote control to display/cancel the MAIN MENU.

éUse the cursor key in the up/down directions to select the menus.

“Press the cursor right to access the menu.

‘Use the cursor key in the up/down directions to select the menu items.

(In case of a slider, move the cursor left/right to adjust.

§Press the MENU key repeatedly to return or to switch the menu off.

Note: Only when in the US English language has been selected (see SET-UPmenu, LANGUAGE, p. 10), the menu items will be displayed with additional icons.

PICTURE

CONTRAST L M BRIGHTNESS

SHARPNESS (COLOUR)

(TINT)

PICTURE MODE

COLOUR TEMP.

(NOISE RED.)

J SELECT LM ADJUST

MENU RETURN

WHITE BALANCE

GAIN
RED	L	M
GREEN
BLUE
BIAS
RED
GREEN
BLUE
J SELECT LM ADJUST	MENU RETURN

Picture menu

Note:

If the message “CAN NOT ADJUST” appears when trying to adjust the picture settings, be sure the Picture mode is set to MEMORY.

Contrast

This control allows you to adjust the contrast level of the picture.

Brightness

This control allows you to adjust the brightness level of the picture.

Sharpness

This control allows you to adjust the edge definition of a picture.

(Colour)

This control allows you to adjust the saturation level of the colours to suit your personal preference.

(Tint)

This control allows you to compensate for the Colour variations in NTSC encoded transmissions.

Picture mode

This control allows you to select a picture mode according to the brightness of the environment in which you are viewing the pictures on the monitor display. Press the cursor left/right to select THEATRE in a dark room, NORMAL in a bright room, MEMORY to keep the picture adjustments you adjusted yourself, RESET to reset the picture to the settings predefined in the factory.

Colour temperature

This control allows you to select the Colour temperature and the white balance of the picture.

&Press the cursor left/right to select 1 (bluer), 2 (standard), 3 (redder) or PRO (white balance).

éSelect PRO to adjust the white balance for bright and dark pictures.

“Press the OK key to display the WHITE BALANCE menu.

‘Select and adjust Red-Green-Blue GAIN to adjust the white balance for signal level.

Select and adjust Red-Green-Blue BIAS to adjust the white balance for black level.

(Noise reduction)

This control allows you to reduce the noise in the picture due to poor reception or poor picture quality.

Select OFF, NR-1, NR-2or NR-3according to the level of noise present.

Note: Select RESET in the OPTION 1 menu, p. 8, to restore the predefined factory PICTURE settings.

Philips FTR 9965/12 manual Use of the menus and the menu system, Picture menu