Clock
Most of the TV channels are not transmitting clock information. There are few cable channels but they are at the end of the channel ring. There is no clock transmission in antenna channels. In such cases either clock extraction is taking a long time or there is no clock
Clock Settings 
Auto clock mode 
Auto clock channel 
Time 
Day 
Time zone 
Daylight saving 
Auto clock mode
&Select Clock with the cursor right.
éPress the cursor down to select the Auto clock mode.
“Press the cursor right to instruct the TV to get the time automatically or manually.
Auto clock channel
With the cursor buttons, select the channel number where time can be found by the TV. Typically time can be found on PBS as well as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu item can not be selected;
Time - Day
With the cursor buttons, select and enter the correct time and day.
Though the Auto clock mode is automatic, you can enter the time and day which, together with the selected channel, will be overwritten once the clock information has been found.
If Auto clock mode Manual has been selected, and no clock search has been done, the system will keep the entered time and day.
Time zone (only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time information will correct the clock display for your local time.
&Select Time zone with the cursor down.
éPress the cursor right to select your local time zone.
Daylight saving (only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcasted signals. This menu item allows you to disable the automatic setting of daylight saving time. This is useful if you live in an area or state where daylight saving is not applied, but you receive channels from other areas where daylight saving signals are broadcasted.
&Select Daylight saving with the cursor down.
éPress the cursor right to select Automatic for automatic clock correction for daylight saving time, based on specially broadcasted signals.
“Select Off to disable automatic clock correction based on the specially broadcasted signals.
10