Philips Flat TV Connect Accessory Devices, Recorder VCR-DVD+RW, Recorder and other A/V devices

Connect Accessory Devices

There is a wide range of audio and video devices that can be connected to your TV. The following connection diagrams show you how to connect them to the TV.

AV1 can handle YPbPr,Y/C and CVBS; AV2 YPbPr (RGB), CVBS and Y/C; HDMI (AV3) ; Side: CVBS and Y/C.

MONITOR

AUDIO

OUT

AV2

AV1

RECEIVER

AV3

R

Pr/R

Y/G

V

S-VIDEO

R

Pr

Y

R

CENTRE

R

R

HDMI

ANT IN

75 L Pb/B CVBS H S-VIDEO L Pb VIDEO L SUBW. L L

Recorder (VCR-DVD+RW)

Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 20” from the screen.

AV2

R Pr/R Y/G V

&Connect the RF Antenna or Cable TV cable (eventually via an optional two-way signal splitter and/or Cable TV converter box) 1 to the RF IN socket of your recorder.

ANT IN	L Pb/B	CVBS H S-VIDEO	é Connect another RF cable 2 from the output OUT of
75
			your recorder to the TV’s input 75 ø x jack.
		CABLE	“ Better playback quality can be obtained if you also
			connect the Video, Audio Left and Right (only for stereo
	3		devices) AV cables 3 to the CVBS, AUDIO L and R
			input jacks of AV2.
			If your recorder has an S-VHS video jack:
		OUT	For improved picture quality, connect an S-video cable
			with the S-VIDEOinput instead of connecting the
	OUT	IN
			recorder to the CVBS jack of AV2.
			S-Video does not provide audio, so audio cables must
	RECORDER		still be connected to provide sound.

Recorder and other A/V devices

								MONITOR
			AV2				AV1		OUT
	R	Pr/R	Y/G	V	S-VIDEO	R	Pr	Y	R
ANT IN	L		CVBS		S-VIDEO	L	Pb	VIDEO	L
75		Pb/B		H

5 6

3

4

OUT IN 2 OUT IN

RECORDER

&Connect the RF antenna cable 1 of the RF IN socket of your other AV device.

éConnect the RF output of the AV device to the RF input of the recorder 2.

“Connect another RF cable 4 from the output OUT of your recorder to the TV’s input 75 Ohm x jack.

‘ To obtain better quality, also connect the Video or

CABLE	S-Video,Audio left and Audio right cables of both devices
	to AV1 (Y or S-VIDEO,AUDIO L and R,) 3 and to AV2
	(CVBS or S-VIDEO,AUDIO L and R) 5.

1Notes:

-In case of mono equipment, only the left loudspeaker reproduces sound. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

-When using the S-VIDEOconnector do not connect any device to the AV2 CVBS or AV1 Y input.

The MONITOR OUT connector can be used for a daisy chaining or to record programs from your TV 6. Only when a recorder is connected to MONITOR OUT it is possible to record a program from your TV. See Record with your recorder, p. 24.

19