Philips Flat TV manual Buttons on top or on the right side of the TV, Active Control See p

7 8 9

AV+ 0 -

	ACTIVE
SAP	CONTROL	CLOCK
ON/OFF	Ambilight	MODE

AV+ Keep this button pressed and then press repeatedly to select AV1, AV2, HDMI (AV3), SIDE or TV channels when in TV mode, according to where you connected the accessory devices (p. 19).

- To type the dot (.) for digital channels.

SAP When you tune a channels where SAP (Second Audio Program) is available, you can toggle between Main and sap. If not available only Main can be selected.

ACTIVE CONTROL See p. 13.

CLOCK Time display

Ambilight see also p. 14.

•ON/OFF Press to switch Ambilight on or off.

•MODE Press repeatedly to select one of the predefined ambient light settings.

Note: When the TV is in standby mode, and you turn on Ambilight, Ambilight will be active. Only then less modes are available.

Buttons on top or on the right side of the TV

V MENU P/CH B

V MENU P/CH B

Picture Sound Ambilight Features

TV

Settings

Demo

Install

Exit

Should your remote be lost or broken you can still change some of the basic settings with the buttons on top or on the right side (according to the type of your set) of your TV.

Press:

•the - V + button to adjust the volume;

•the - P/CH + button to select the TV channels or sources.

Press the MENU button to summon the main menu without the remote control.

Use:

•the - V + button and the - P/CH + button to select menu items in the directions as shown;

•the MENU button to confirm your selection.

Note:

When activated via the MENU button on top or the right side of the TV, only Exit lets you remove the menu.

Navigate to Exit and press the MENU button.

5