Philips Flat TV Connect extra subwoofer, Side connections, To select connected devices, Headphone

Connect extra subwoofer

	MONITOR	AUDIO
	OUT				AV3
		RECEIVER
	R	CENTRE	R	R	HDMI
VIDEO	L	SUBW.	L	L

SUBWOOFER

Side connections

	AUDIO
2	VIDEO
	S•VIDEO

1

3

To enhance the sound reproduction of your TV you can connect an externally powered subwoofer (between 20 and 250 Hz).

&Connect the audio cable of the external subwoofer to the SUBWOOFER socket at the bottom of your TV.

éSelect Subwoofer in the Settings, General menu, p. 8.

“Adjust the frequency of the external subwoofer to 100- 120 Hz (according to your personal preference) if present on the subwoofer.

‘Adjust the volume level of the external subwoofer, presumed this control is present on the subwoofer. See also the instruction manual of the external subwoofer.

Camera, Camcorder, Game

&Connect your camera, camcorder or game as shown.

éConnect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect

AUDIO R 3.

S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEOinput 1 and AUDIO inputs 3.

Do not connect cable 1 and 2 at the same time. This may cause picture distortion !

Headphone

&Insert the plug into the headphone socket L as shown.

éPress ¬ on the remote control to switch off the internal loudspeakers of the TV.

The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack.

In the Sound menu select Headphone volume to adjust the headphone volume.

To select connected devices

7 8 9

AV+ 0 -

	ACTIVE
SAP	CONTROL	CLOCK
ON/OFF	Ambilight	MODE

&Keep the AV+ button pressed and then press this button repeatedly or select Source in the Settings menu (see p. 11) to select AV1, AV2, HDMI (AV3), Side or TV channels, according to where you connected your devices.

éPress the cursor up/down.

“Press OK.

23