Audio- and video equipment buttons
POWER
DVD/R CBL TV VCR AUX
®º
Most of the audio and video equipment from our range of products can be operated with the remote control of your TV.
Press one of the buttons after you pressed the Select button repeatedly according to the equipment you want to operate with this remote control. See Use of the remote control, p. 3.
INFO | SELECT | PIXEL PLUS |
Ò ‡ π †
TV | CC | SURR | HD |
|
|
| SCREEN |
SURF |
|
| FORMAT |
| OK |
PIP | MENU |
+ +
VOL MUTECH
- -
1 2 3
4 5 6
7 8 9
AV+ 0 -
POWER to switch to standby (VCR)
ºfor pause,
®for record,
Òfor rewind (VCR, CD); search down (DVD, AMP)
‡for stop,
πfor play,
†for fast forward (VCR, CD); search up (DVD/AMP)
INFO display information
MENU to switch the menu on or off
-CH + for chapter, channel, track selection
0 to 9 digit entry,
-tape index (VCR), select a DVD chapter, select a frequency (AMP)
CLOCK VCR timer
SURR surround on/off (AMP, CD)
cursor up/down
to select the next or the previous disc (CD)
cursor left/right
to select the previous or following track (CD)
| ACTIVE |
|
SAP | CONTROL | CLOCK |
ON/OFF | Ambilight | MODE |
Notes:
-If no action is being undertaken within 60 seconds, the remote control returns to TV mode.
-After an action in the selected system mode, the remote control will remain in this mode for 60 seconds and will then return to TV mode or press the Select button to return to TV mode immediately.
Record with your recorder
To record
Record a TV program
You can record a TV program using your recorders tuner without affecting your TV.
&Select the channel number on your recorder.
éSet your recorder to record.
See the handbook for your recorder.
Switching channel numbers on your TV does not disturb recording !
Record a program from MONITOR OUT
You can record a program on your recorder from the TV tuner via MONITOR OUT.
&Switch on the device.
éSelect the correct channel on your TV and the correct input on your recorder.
“Set your recorder to record.
You record the tuner channel of the TV, even when you switch to an AV input using the AV+ button on the remote control.
Do not switch channels or turn off your TV when you are recording through MONITOR OUT.
Note: When a TV channel or AV source is blocked because of a rating set via the Channels menu (see p. 15), also the record output picture and sound are muted.
24