3.2 Connect to your TV
1Connect one end of the coaxial cable to signal output of the antenna and the other end to the input on your TV receiver. 1
4Using your indoor television antenna
4.1 For VHF/FM reception
1Extend the telescoping dipoles to the longest possible length. 2
2Turn your TV or FM radio to the desired channel/station. Adjust the dipoles by moving in different directions up and down, until reception is achieved. 3
3Rotate the 12 position fine tuning control until the best reception is achieved.
4.2 For UHF reception
1Turn your TV to the desired channel.
2Position the UHF reflector until you obtain the best reception by rotating it side to side and up and down. 4
3Rotate the 12 position fine tuning control until the best reception is achieved.
DNote
For best results you should point your antenna in the direction of the signal source.
SDV2720_27_EN.indd 4
1
TV
ANT.
2
3
4
5/5/08 4:19:42 PM