VRZ220/250 layout 4/8/99 10:11 PM Page 10
10 Hookups With a Stereo TV
VRZ250
AUDIO | ANT | |
| L | IN |
|
| |
OUT | IN |
|
| R |
|
VIDEO | OUT | |
OUT | INCH3 | CH4 |
antenna or cable
Video Cable
Audio Cable
VRZ220
ANT
IN
AUDIO |
|
| |
OUT | IN |
| OUT |
VIDEO | CH3 | CH4 | |
|
|
antenna or cable
Video Cable
Audio Cable
1
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable (not supplied) to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.
3 VRZ250
Connect an audio cable (not supplied) to the red and white AUDIO OUT Jacks on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV.
3 VRZ220
Connect an audio cable (not supplied) to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.
If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels. This hookup will not give you stereo sound. To get stereo sound, use the connections on pages
4
Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.